2 layers40 × 30 mm
2 layers83 × 83 mm
PX-01-MOD SUCTION FAN
OPRobots/PX-017Robot siguelineas de alto rendimiento.
- Size
- 83 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 9
- Tracks, vias
- 26, 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Jan 2024
- Updated
- 7 Oct 2024
Overview
PX-01-MOD SUCTION FAN is an open-source printed circuit board by OPRobots, from the OPRobots/PX-01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83 × 83 mm with 3 parts on 3 nets, routed with 26 tracks and 6 vias.
It belongs with the robots and motor control boards and the ESP32 boards of this library.
README
README.mdPX-01 Linefollower
Robot siguelineas modular. Está pensado para tener un diseño sencillo a la par que lo mas competitivo posible. Con 16 sensores IR, succión y motores de gran poder.
en construcción
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | CENTRIFUGAL_FAN1, MOTOR, MOTOR |
Questions
How big is the PX-01-MOD SUCTION FAN PCB?
It measures 83 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PX-01-MOD SUCTION FAN use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PX-01-MOD SUCTION FAN KiCad files?
From the OPRobots/PX-01 repository on GitHub, at the commit this page was made from: the board is hardware/PX-01-MOD-SUCTION-FAN/kicad_project/PX-01-MOD-SUCTION-FAN.kicad_pcb and its schematic hardware/PX-01-MOD-LINEx16/kicad_project/PX-01-MOD-LINEx16.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PX-01-MOD SUCTION FAN design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT