

Morro dragon v2
Robot siguelineas con succión centrifuga y STM32F1
- Size
- 59.4 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 57
- Pads
- 207
- Tracks, vias
- 793, 51
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Sep 2019
- Updated
- 1 May 2023
Overview
Morro dragon v2 is an open-source printed circuit board by OPRobots, from the OPRobots/DragonBot repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 59.4 × 99.9 mm with 69 parts on 57 nets, routed with 793 tracks and 51 vias.
It is built around the QRE1113 and CD74HC4067M. Its parts include 23 resistors, 14 ICs, 9 capacitors, 2 diodes and 2 connectors.
Main components
2QRE1113
DIP-41mm 20mA DIP-4 Reflective Optical Interrupters ROHSonsemiReflective Optical InterruptersCD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdDragonBot
Robot siguelineas con succión centrifuga y STM32F1

Hardware
- STM32F1 "BluePill"
- Driver de motores TB6612FNG
- 2x Motores Pololu N20 HP @3000rpm
- 1x Motor Brushless Rotorx
- LiPo 2S ~250 mAh
- 12x Sensores QRE1113
- 12x Potenciometros para regular la ganancia de los sensores
- Ruedas Scaleauto Procomp 1
- Chasis de PCB autosoportado con soportes de motores, ventilador y parachoques impresos en PLA

Software
- Programado con VSCode y PlatformIO
- Funciones de PID y cálculo de posición en la línea
- Disponibles programas para configuración por defecto, coreless y brushless en diferentes ramas secundarias
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 47 | Resistors_SMD:R_0805 | R1, R2, R3, R4, R10, R11, R12, R14, R15, R16, R17, R18, R19, R22, R23, R24 +5 |
| 14 | 51K | Potentiometers:Potentiometer_Trimmer-EVM3E | POT1, POT2, POT3, POT4, POT5, POT6, POT7, POT8, POT9, POT10, POT11, POT12, POT13, POT14 |
| 14 | QRE1113 | mods:QRE1113 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | , , , |
| 3 | 100nF | Capacitors_SMD:C_0805 | C2, C4, C7 |
| 3 | 1uF | Capacitors_SMD:C_0805 | C1, C3, C6 |
| 2 | 150 | Resistors_SMD:R_0805 | R13, R21 |
| 2 | C | Capacitors_SMD:C_0805 | C8, C9 |
| 2 | LED | LEDs:LED_0805 | D1, D2 |
| 1 | CD74HC4067 | Housings_SSOP:TSSOP-24_4.4x7.8mm_Pitch0.65mm | MULTIPLEXADOR1 |
| 1 | CP1 | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | Conn_01x10_Female | Socket_Strips:Socket_Strip_Straight_1x10_Pitch1.27mm | J1 |
| 1 | GS3 | Connectors:GS3 | J5 |
More from OPRobots/DragonBot
2- 2 layers136.6 × 116.9 mm

- 2 layers99.8 × 99.6 mm

Similar boards
- 2 layers373.4 × 34.5 mm

- 4 layers122.2 × 115.1 mm

Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 2 layers60 × 100 mm

- 2 layers96 × 78.3 mm

Yokozunita potencia
OPRobots/Yokozunita
Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.
45 parts2GPL-3.0 - 2 layers35.5 × 58 mm

Esguicho 2.0
project-neon/Esguicho
Neste repositório temos os principais arquivos que usamos para os 3 capítulos, Eletrônica, Mecânica e Software. Segue abaixo uma lista do que temos em cada uma das pastas:
45 parts2 - 4 layers80 × 87.6 mm

AratMicro
vorlaxen-labs/AratMicro
High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).
110 parts1MIT - 2 layers130 × 119 mm

- 2 layers163 × 75.8 mm

Questions
How big is the Morro dragon v2 PCB?
It measures 59.4 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Morro dragon v2 use?
69 parts, built around the QRE1113 and CD74HC4067M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Morro dragon v2 KiCad files?
From the OPRobots/DragonBot repository on GitHub, at the commit this page was made from: the board is pcb_files/pcb_morro_v2/Morro_dragon_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Morro dragon v2 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).