4 layers48 × 80 mm
4 layers42 × 30 mm
RC-1
OpenRTX/RC-12Radio modem in a M.2 form factor.
- Size
- 42 × 30 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 46
- Nets
- 122
- Pads
- 279
- Tracks, vias
- 0, 1
- Pours
- 3
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Aug 2021
- Updated
- 17 Jan 2022
Overview
RC-1 is an open-source printed circuit board by OpenRTX, from the OpenRTX/RC-1 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 42 × 30 mm with 46 parts on 122 nets.
Its parts include 28 capacitors, 11 resistors, 3 inductors, 2 ICs and 2 connectors. It belongs with the STM32 boards of this library.
README
README.mdRadioCard 1 (RC-1)
radio modem in a M.2 form factor.
Block diagram
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C7, C8, C11, C12, C13, C22, C26 |
| 5 | 10n | Capacitor_SMD:C_0402_1005Metric | C9, C15, C23, C27, C28 |
| 4 | ? | Capacitor_SMD:C_0402_1005Metric | C16, C19, C21, C24 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R7, R8, R9 |
| 2 | 22n | Capacitor_SMD:C_0402_1005Metric | C14, C25 |
| 2 | 40K | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 6p8 | Capacitor_SMD:C_0402_1005Metric | C1, C6 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 15n | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 1k1 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 20n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 22n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 270 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 27n | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 3k6 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 3r9 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 470p | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 4p7 | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 560 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | ADF7021 | Package_CSP:LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm | U2 |
| 1 | PCIe_M.2_B-Key | NGFF:NGFF_B | P1 |
| 1 | R | Resistor_SMD:R_01005_0402Metric | R6 |
| 1 | STM32F401CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | U.FL | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
Questions
How big is the RC-1 PCB?
It measures 42 × 30 mm and has 4 copper layers, 0.8 mm thick.
What parts does the RC-1 use?
46 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC-1 KiCad files?
From the OpenRTX/RC-1 repository on GitHub, at the commit this page was made from: the board is RC-1.kicad_pcb and its schematic DAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC-1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers50 × 42 mm
Beam Offset Switch
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
46 parts371 - 4 layers53.3 × 34.5 mm
- 4 layers91.1 × 53.6 mm
Parallel2usb
tomverbeure/fake_parallel_printer
Capture traffic on parallel printer port to USB
46 parts95BSD-2-Clause - 4 layers105 × 47 mm
Pdu
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
46 parts36BSD-3-Clause - 4 layers44.5 × 22.5 mm
- 4 layers41.8 × 14.8 mm
Nrf52811 usb
alvarop/chaac
This is a work in progress for a wireless weather station project.
46 parts21MIT - 4 layers50.8 × 114.3 mm
