Skip to the content
2 layers44.5 × 50.8 mmBCU Breadboard Adapter, the printed circuit board in 3D

BCU Breadboard Adapter

OpenKNX/OpenKNX105

OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts

Size
44.5 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
19
Pads
76
Tracks, vias
216, 9
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Feb 2022
Updated
11 Jul 2026

Overview

BCU Breadboard Adapter is an open-source printed circuit board by OpenKNX, from the OpenKNX/OpenKNX repository on GitHub. It is a 2-layer board of 44.5 × 50.8 mm with 22 parts on 19 nets, routed with 216 tracks and 9 vias.

It is built around the ADUM1201AR. Its parts include 10 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

OpenKNX

OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts

Find all information in the Wiki

Parts

22
QtyValueFootprintReferences
4JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2, JP3, JP4
2100nCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC1, C2
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7, J8
2Jumper_NC_DualConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP5, JP6
2Konnekting_µBCUsirsydom:Konnekting_BCUGN1, GN3
2VCC_BotConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4, J41
2VCC_TopConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5, J51
1ADuM1201ARPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1BCU_LogikConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1KNX_CCConnector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_HorizontalJ1
1KNX_Wagosirsydom:KNX_ConnectorJ2
1Siemens_BCUsirsydom:Siemens_UP117_12_flat_header_onlyGN2
1VCC_ExtConnector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_HorizontalJ3

More from OpenKNX/OpenKNX

2
  • 2 layers71.1 × 22.9 mmPiPico BCU Connector, the printed circuit board in 3D

    PiPico BCU Connector

    OpenKNX/OpenKNX

    OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts

    19 parts105
  • 2 layers67.3 × 22.9 mmItsyBitsy BCU Connector, the printed circuit board in 3D

    ItsyBitsy BCU Connector

    OpenKNX/OpenKNX

    OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts

    15 parts105

Similar boards

  • 2 layers23 × 45 mmCell monitor, the printed circuit board in 3D

    Cell monitor

    scttnlsn/cell-monitor

    Battery cell monitor and balancer

    13 parts39MIT
  • 4 layers120 × 100 mmBsc, the printed circuit board in 3D

    Bsc

    shining-man/bsc_hw

    Hardware battery safety controller (BSC)

    286 parts31MIT
  • 2 layers73 × 113 mmFT817 buddy v4, the printed circuit board in 3D

    FT817 buddy v4

    g7uhn/ft817_buddy

    A companion display & controls for the FT-817

    76 parts28CC-BY-SA-4.0
  • 2 layers100 × 88 mmHootswitch, the printed circuit board in 3D

    Hootswitch

    saybur/hootswitch

    ADB keyboard/mouse switch for vintage Mac computers.

    127 parts24
  • 2 layers87 × 30.8 mmEbus2usb, the printed circuit board in 3D

    Ebus2usb

    jkyprian/ebus2usb

    1TE DIN Rail eBus to USB Type-C Adapter

    59 parts10
  • 2 layers49.5 × 40.5 mmHcv, the printed circuit board in 3D

    Hcv

    chrkir/hcv

    Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.

    32 parts9
  • 2 layers50.3 × 54 mmJK BMS CAN, the printed circuit board in 3D

    JK BMS CAN

    dremeier/Arduino-JK-BMS-To-Pylontech-CAN-PCB

    PCB and Case for the Arduino JK-BMS To Pylontech CAN converter

    66 parts9
  • 2 layers50 × 75 mmM2r, the printed circuit board in 3D

    M2r

    cuspaceflight/m2-electronics

    This repository contains the schematics, PCB designs and firmware for the various electronic systems onboard Martlet 2.

    118 parts5

Questions

How big is the BCU Breadboard Adapter PCB?

It measures 44.5 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BCU Breadboard Adapter use?

22 parts, built around the ADUM1201AR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BCU Breadboard Adapter KiCad files?

From the OpenKNX/OpenKNX repository on GitHub, at the commit this page was made from: the board is Hardware/OpenKNX/BCU_Breadboard_Adapter/EDA-Files/BCU_Breadboard_Adapter/BCU_Breadboard_Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BCU Breadboard Adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask OpenKNX before reusing the design.