Skip to the content
2 layers30 × 88 mm6ct expander, the printed circuit board in 3D

emonPi3 & emonTx6 Hardware

Size
30 × 88 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
34
Pads
148
Tracks, vias
141, 45
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Nov 2022
Updated
11 Aug 2026

Overview

6ct expander is an open-source printed circuit board by openenergymonitor, from the openenergymonitor/emon32 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 30 × 88 mm with 60 parts on 34 nets, routed with 141 tracks and 45 vias.

It is built around the DF2B7AE,H3F and SJ-3524-SMT-TR. Its parts include 25 resistors, 12 capacitors, 9 connectors and 6 diodes.

Main components

2

README

pcb/emonpi3/README.md

emonPi3

emonPi3 is a drop in replacement for the emonPi2. The main change is the use of a modern high performance microcontroller in place of the aging and expensive AVR parts. Additionally, the firmware moves away from using Arduino as the base environment.

Firmware

Firmware for the emonPi3 is available here. The emonPi3 comes preloaded with a USB bootloader, allowing the firmware to be updated without any specialised hardware.

Generating manufacturing outputs

You will need to have KiCad 7 installed. In the emonpi3 folder, run python3 generate.py. This will make a folder called output-<gitrev> with the following contents:

  • KiCad schematic annotated with git revision
  • KiCad PCB annotated with git revision
  • Schematic PDF
  • Floorplan PDF
  • Bill of materials CSV
  • Gerbers output
  • 3D render (STEP format)

This has been tested on Linux and macOS.

Changelog

1.0

Production

  • Correct front panel LED footprint
  • Routing tweaks

0.2

First production candidate

  • Correct SPI connection
  • Move LED to front panel
  • ESD protection on all inputs and buttons
  • Expose reset to Pi connection

0.1

First public limited manufacturing run.

  • Add hardware zero crossing detector.
  • Add ADC calibration hardware.
  • Add more testpoints.
  • Move EEPROM and reassign serial modules.
  • Add user button, LEDs, and external I2C header.

0.1-dev

  • First bring up of the emonPi3.
    • Directly physically compatible with the existing emonPi2.
  • Change to 4-layer board
  • Add extra filters and power protection

Parts

60
QtyValueFootprintReferences
1347KResistor_SMD:R_0603_1608MetricR3, R4, R7, R8, R10, R11, R13, R14, R17, R18, R21, R23, R25
610nCapacitor_SMD:C_0603_1608MetricC2, C5, C7, C9, C11, C12
610uFCapacitor_SMD:C_0603_1608MetricC1, C3, C4, C6, C8, C10
63K3Resistor_SMD:R_0603_1608MetricR5, R9, R15, R19, R22, R24
65VDiode_SMD:D_SOD-523D1, D2, D3, D4, D5, D9
66R8Resistor_SMD:R_1206_3216MetricR1, R2, R6, R12, R16, R20
6SJ-3524-SMT-TRConnector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_HorizontalJ1, J2, J3, J4, J5, J6
6SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6
2Conn_01x01Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ8, J9
2MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ7

More from openenergymonitor/emon32

1
  • 4 layers85 × 88 mmEmonPi3, the printed circuit board in 3D

    EmonPi3

    openenergymonitor/emon32

    emonPi3 & emonTx6 Hardware

    174 parts3CC-BY-SA-4.0

Similar boards

  • 6 layers34 × 30.2 mmUSB LiDAR VL53L9, the printed circuit board in 3D

    USB LiDAR VL53L9

    RemiFM/USB-LiDAR-VL53L9

    USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU

    72 parts24MIT
  • 2 layers133.7 × 120.8 mm3phaseDiverter, the printed circuit board in 3D

    3phaseDiverter

    FredM67/PVRouter-KiCad

    Fichiers de conception KiCad pour le Mk2 PV Router — un système open-source de routage solaire photovoltaïque universel (monophasé, triphasé avec ou sans neutre, biphasé).

    204 partsCC-BY-SA-4.0
  • 4 layers81.5 × 134.5 mmMain PCB, the printed circuit board in 3D

    Main PCB

    Xii-Labs/Xii-Boy-Ultra

    The world's first wire-free Wii portable, now in the palm of your hands. Better than ever, optimized to delight, built for fun. The next generation of Wii portables starts now.

    37 parts104CERN-OHL-S-2.0
  • 2 layers58.8 × 55.7 mmAiO i2s DAC, the printed circuit board in 3D

    AiO i2s DAC

    martinroger/ipodesp32

    An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

    102 parts24MIT
  • 4 layers75.1 × 60.9 mmMain pcb, the printed circuit board in 3D

    Main pcb

    Xenii1642/Xii-Boy-Pocket

    Newer, Better, Thinner and Open-Source Xii-Boy

    52 parts15
  • 4 layers82.8 × 88.9 mmMetal detector test, the printed circuit board in 3D

    Metal detector test

    bobasaurus/lumber-plunder-metal-detector

    A VLF induction balance metal detector with a wooden body

    111 parts11GPL-3.0
  • 2 layers60 × 60 mmMinimidi v1 panellized 4x, the printed circuit board in 3D

    Minimidi v1 panellized 4x

    bjonnh/dinoctopus

    A MIDI router and USB interface using a Raspberry PICO (RP2040)

    88 parts6MIT
  • 2 layers97.3 × 120.4 mmController, the printed circuit board in 3D

    Controller

    bjonnh/2024_emmg_workshop_midi

    56 parts3CC0-1.0

Questions

How big is the 6ct expander PCB?

It measures 30 × 88 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 6ct expander use?

60 parts, built around the DF2B7AE,H3F and SJ-3524-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 6ct expander KiCad files?

From the openenergymonitor/emon32 repository on GitHub, at the commit this page was made from: the board is pcb/6ct-expander/6ct-expander.kicad_pcb and its schematic pcb/6ct-expander/6ct-expander.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 6ct expander design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).