Skip to the content
2 layers41 × 25.4 mmAudio PCB, the printed circuit board in 3D

ECE 438X Senior Design Capstone Project

Size
41 × 25.4 mm
Copper layers
2
Thickness
1.65 mm
Parts
28
Nets
34
Pads
95
Tracks, vias
152, 16
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Jun 2025
Updated
16 Feb 2026

Overview

Audio PCB is an open-source printed circuit board by OpenAir-Lab, from the OpenAir-Lab/capstone-project repository on GitHub, published under the MIT licence. It is a 2-layer board of 41 × 25.4 mm with 28 parts on 34 nets, routed with 152 tracks and 16 vias.

It is built around the ICS-43434. Its parts include 9 resistors, 3 capacitors, 1 IC and 1 crystal. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

capstone-project

ECE 438X Senior Design Capstone Project

Parts

28
QtyValueFootprintReferences
3M3MountingHole:MountingHole_3.2mm_M3_ISO14580_PadH13, H15, H16
3~TestPoint:TestPoint_Pad_D1.0mmTPAMP1, TPBCLK1, TPLRCLK1
22kResistor_SMD:R_0603_1608MetricR23, R27
247kResistor_SMD:R_0603_1608MetricR20, R21
10.1uFCapacitor_SMD:C_0603_1608MetricC94
1100kResistor_SMD:R_0603_1608MetricR28
1100k 5%Resistor_SMD:R_0603_1608MetricR24
11uFCapacitor_SMD:C_0603_1608MetricC86
122pFCapacitor_SMD:C_0603_1608MetricC97
1330kResistor_SMD:R_0603_1608MetricR26
1634kResistor_SMD:R_0603_1608MetricR25
168Resistor_SMD:R_0603_1608MetricR22
1CH_LEFTJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP14
1CH_MONO_MIXJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP15
1CH_RIGHTJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP16
1DriverJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabelsJP12
1EYESPIcapstone-project:Adafruit EYESPI FPC ConnectorX2
1GAIN_{LOGIC}Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP11
1GAIN_{R}Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP13
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK2
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU7
1SpeakerConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalLS2

More from OpenAir-Lab/capstone-project

12
  • 4 layers182.6 × 41.8 mmSystem testbed, the printed circuit board in 3D

    System testbed

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    199 parts3MIT
  • 4 layers156.8 × 97.5 mmModulino, the printed circuit board in 3D

    Modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    190 parts3MIT
  • 4 layers57 × 41 mmRf transceiver modulino, the printed circuit board in 3D

    Rf transceiver modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    113 parts3MIT
  • 2 layers58.4 × 65.8 mmBOOSTXL BATPAKMKII, the printed circuit board in 3D

    BOOSTXL BATPAKMKII

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    74 parts3MIT
  • 2 layers70 × 57.5 mmHmi modulino, the printed circuit board in 3D

    Hmi modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    74 parts3MIT
  • 4 layers39.3 × 56.7 mmCC1200EMK-420-470-old, the printed circuit board in 3D

    CC1200EMK-420-470-old

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    59 parts3MIT
  • 4 layers39.4 × 35.6 mmCC1120EM 169, the printed circuit board in 3D

    CC1120EM 169

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    57 parts3MIT
  • 4 layers41 × 41 mmRf amplifier modulino, the printed circuit board in 3D

    Rf amplifier modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    57 parts3MIT
  • 4 layers68.9 × 53.3 mmMcu modulino, the printed circuit board in 3D

    Mcu modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    55 parts3MIT
  • 4 layers25.4 × 41.4 mmRf switch modulino, the printed circuit board in 3D

    Rf switch modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    28 parts3MIT
  • 2 layers69.6 × 55.9 mmTestbed mcu, the printed circuit board in 3D

    Testbed mcu

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    24 parts3MIT
  • 4 layers30.5 × 30.5 mmGRF DFN6-15-23A, the printed circuit board in 3D

    GRF DFN6-15-23A

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    21 parts3MIT

Similar boards

  • 2 layers196 × 104 mmHack fft, the printed circuit board in 3D

    Hack fft

    hack-apollo/hack_spectrum

    a music spectrum use esp32-pico-d4 and ws2812b.

    611 parts28GPL-3.0
  • 2 layersAI voice assistant, the printed circuit board in 3D

    AI voice assistant

    DhamuVkl/ESP32S3-AI-Voice-Assistant

    This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…

    78 parts26MIT
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 4 layers108.6 × 87.7 mmBlinky badge light, the printed circuit board in 3D

    Blinky badge light

    rowr111/blinky-badge-light

    lighting badge with unique patterns and sound reactivity

    123 parts9MIT
  • 4 layers66.8 × 150 mmCooee Big brains, the printed circuit board in 3D

    Cooee Big brains

    DetectiveMittens/Cooee

    An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication

    200 parts3GPL-2.0
  • 2 layers9.9 × 7.9 mmIcs43434 breakout, the printed circuit board in 3D

    Ics43434 breakout

    expoman/tdk_ics-43434_breakout

    small breakout board for the TDK ICS-43434 microphone chip

    5 parts2GPL-3.0
  • 2 layers178.6 × 66 mmESP32S3comV3.2, the printed circuit board in 3D

    ESP32S3comV3.2

    leeyumsk/IRL-Subtitles

    Using techniques similar to human perception to localize sounds and speakers.

    69 parts2
  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0

Questions

How big is the Audio PCB PCB?

It measures 41 × 25.4 mm and has 2 copper layers, 1.65 mm thick.

What parts does the Audio PCB use?

28 parts, built around the ICS-43434. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Audio PCB KiCad files?

From the OpenAir-Lab/capstone-project repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD/audio-modulino/Audio PCB.kicad_pcb and its schematic Documentation/Reference Designs/Adafruit/TFT Display Module/Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Audio PCB design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).