
HAT
ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

Using techniques similar to human perception to localize sounds and speakers.
ESP32S3comV3.2 is an open-source printed circuit board by leeyumsk, from the leeyumsk/IRL-Subtitles repository on GitHub. It is a 2-layer board of 178.6 × 66 mm with 69 parts on 86 nets, routed with 633 tracks and 72 vias.
It is built around the ESP32-S3-WROOM-1U-N8R8, LT1963AEST-3.3 and ICS-43434, with the 1N5819WS, BD050-10-A-0-0500-L-D and BSS138 among its other parts. Its parts include 16 capacitors, 15 resistors, 11 connectors, 5 diodes and 3 ICs. It belongs with the audio and music boards and the ESP32 boards of this library.
Using techniques similar to human perception to localize sounds and speakers.
The final goal of the project is to make AR-Glasses that can display text taken from microphones to be displayed on a heads up display to the user. The system integrates a microphone array, and a camera to localize sound, transcribe speech, and visually present captions on a laptop screen connected to the glasses. This project would ideally be combined with a smart glass display/platform in the future.
The current state of the project is that there is no processing that is happening locally on the board, all the data is being streamed over to a computer to be processed and displayed. There are one ESP32-S3 wroom 1U that are being used to get audio and one ESP32-S3 eye that is acting as an AP, camera, and handling the data routing. This is a battery powered data colletion unit.
The project consists of:
Each is structured into their own folders, and sub groups.
This is the code that is running on the ESP32. Most of the code here is for data collection and transmission. This code has two main parts, one that will go on the arm board and one that goes on the eye. This was made, built, and flashed using vscode.
This is the code that will be run on the computer to process the data that is streamed. Due to time constraints the integration of the audio localization was not included in the OpenCV and speech to text display.
This has both the PBC and KiCad files and the glasses cad models. The main components are:
This has the KiCad models that were to produce the boards. That includes the schematics, the PCB files, and gerber files to order the glasses.
Onshape was used to the frames that the PCBs will fit in on the glasses.
This is all the documentation that was created in the testing and researching on creating the glasses. This also has the pin outs that were used on the glasses for reference.
https://github.com/espressif/esp-who/tree/master
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C6, C7, C10, C11, C14, C18, C19 |
| 8 | 0 | Library:mouse-bite-3mm-slot | mouse-bite-3mm-slot, mouse-bite-3mm-slot-2, mouse-bite-3mm-slot-3, mouse-bite-3mm-slot-4, mouse-bite-3mm-slot-5, mouse-bite-3mm-slot-6, mouse-bite-3mm-slot-7, mouse-bite-3mm-slot-8 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C9, C16, C20 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R8, R9 |
| 4 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6, R7 |
| 4 | ICS-43434 | Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mm | MK1, MK2, MK3, MK4 |
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15, R20 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R13 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | BD050-10-A-0-0500-L-D | Through_hole_pin_socket:GCT_BD050-10-A-1-0500-L-D | J5, J6 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5, D7 |
| 2 | PinHeader_2x06_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J7, J8 |
| 2 | PinSocket_2x05_P2.00mm_Vertical | Connector_PinSocket_2.00mm:PinSocket_2x05_P2.00mm_Vertical | J3, J4 |
| 2 | USB_C_Receptacle_USB2.0_16P | Library:HRO_TYPE-C-31-M-12 | J1, J2 |
| 1 | 0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | R5 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J10 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J11 |
| 1 | Conn_02x01 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 1 | ESP32-S3-WROOM-1U-N8R8 | PCM_Espressif:ESP32-S3-WROOM-1U | U1 |
| 1 | LT1963AEST-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LT1963AxST-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | OS102011MA1QN1 | footprints:OS102011MA1QN1_CNK | SW2 |
| 1 | PRTR5V0U2X_215 | Library:SOT143B | D4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

slemanz/nina-project
Integrated hardware and firmware solution for a data acquisition device based on the u-blox NINA-B306 (nRF52840) Open CPU.

bartekp-i/myMechanicalKeyboard
This project is a custom 75% mechanical keyboard PCB designed around the Raspberry Pi RP2040 microcontroller.


axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.


It measures 178.6 × 66 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the ESP32-S3-WROOM-1U-N8R8, LT1963AEST-3.3, ICS-43434 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the leeyumsk/IRL-Subtitles repository on GitHub, at the commit this page was made from: the board is Hardware/Glasses Arms PCBs/Version 3.2/ESP32S3comV3.2.kicad_pcb and its schematic Hardware/Glasses Arms PCBs/Version 3.2/CameraSubBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask leeyumsk before reusing the design.