
Ephys test module molex-504070-32
open-ephys/ephys-test-module-molex-504070-32-chan
Test module for headstages using Molex 504070 electrode interface

Test module for headstages compatible with the NanoZ/MOLC-110-01-S-Q_1 electrode interface
Ephys test module molc-64-chan is an open-source printed circuit board by open-ephys, from the open-ephys/ephys-test-module-molc-64-chan repository on GitHub. It is a 2-layer board of 100 × 60 mm with 20 parts on 213 nets, routed with 453 tracks and 61 vias.
It is built around the AT24C64D-SSHM-T, YC248-JR-07220KL and CRCW04021K00FKEDC, with the BSE-040-01-F-D-A-TR and M20-8760242 among its other parts. Its parts include 5 connectors, 3 resistors, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards of this library.
This test module works with the Open Ephys automated ephys tester. It can be used to verify the functionality of headstage-adapters and headstages that use the nanoZ/FOLC-110-01-S-Q_1 pinout.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220k | Resistor_SMD:R_Array_Convex_8x0602 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | BSE-040-01-F-D-A-TR | jonnew:SAMTEC_BSE-040-01-X-D-A | J4, J5 |
| 2 | MOLC-110-01-S-Q_1 | jonnew:SAMTEC_MOLC-110-01-S-Q | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | AT24C64D-SSHM-T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMD | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | ~ | open-ephys:OEPS_SN-STICKER-8x20mm | H1 |

open-ephys/ephys-test-module-molex-504070-32-chan
Test module for headstages using Molex 504070 electrode interface

open-ephys/ephys-test-module-omnetics-a79026-001-32-chan
Test module for headstages using Omnetics A79026-001 electrode interface

open-ephys/ephys-test-module-hirose-df40-64-chan
Test module for headstages using Hirose DF40C-70DP-0.4V(51) electrode interface

synthetos/KicadExample
This project provides a Kicad example and a detailed wiki on using Kicad. The project itself is a tiny board for connecting Wheatstone bridge load cells to 3.3v ADC inputs



CrafterSteve/ESP32_Temp_Con
An temperture control device, based on ESP32. With custom PCB board, it can fit an ESP32-DevKit as controller, DAC and ADC is done on board, as well as, a 5 to +-12v power supply..

HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.
It measures 100 × 60 mm and has 2 copper layers, 1.59 mm thick.
20 parts, built around the AT24C64D-SSHM-T, YC248-JR-07220KL, CRCW04021K00FKEDC and BSE-040-01-F-D-A-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the open-ephys/ephys-test-module-molc-64-chan repository on GitHub, at the commit this page was made from: the board is pcb/ephys-test-module-molc-64-chan.kicad_pcb and its schematic pcb/ephys-test-module-molc-64-chan.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask open-ephys before reusing the design.