4 layers137.4 × 82.6 mm
Lcd standard-5R
rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
179 parts
2 layers33 × 45 mm
WBLNA
OneAudio/WBLNA11Wide Bandwidth low noise amplifier 20Hz-20MHz 20/40dB
- Size
- 33 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 24
- Pads
- 117
- Tracks, vias
- 218, 89
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Oct 2019
- Updated
- 16 Oct 2019
Overview
WBLNA is an open-source printed circuit board by OneAudio, from the OneAudio/WBLNA repository on GitHub. It is a 2-layer board of 33 × 45 mm with 47 parts on 24 nets, routed with 218 tracks and 89 vias.
It is built around the LT6200CS8-10#PBF, AD8510ARZ and BAT54S, with the MBR0540 and P4SMA12A among its other parts. Its parts include 19 capacitors, 13 resistors, 7 connectors, 4 diodes and 3 ICs. It belongs with the audio and music boards of this library.
Main components
5
LT6200CS8-10#PBF
SO-8-40℃~+85℃ -5V~5V 1 1.3uA 1.6GHz 100dB 1mV 2.5V~12.6V 500nA 50V/us 60mA 8uV/℃ 950pV/√Hz@100kHz Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SO-8 Operational Amplifier ROHSAnalog DevicesOperational Amplifier
AD8510ARZ
SOIC-8-15V~-5V、5V~15V -40℃~+125℃ 1 108dB 1uV/℃ 2.3mA 20V/us 25pA 400uV 70mA 75pA 8MHz 8nV/√Hz@1kHz Built-in compensation、Overvoltage protection、High capacitive load driving SOIC-8 FET Input Amplifiers ROHSAnalog DevicesFET Input Amplifiers
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
P4SMA12A
DO-214AC(SMA)10.2V 12.6V 16.7V 23.95A@10/1000us 400W@10/1000us 5uA TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSYangzhou Yangjie Electronic TechnologyESD And Surge Protection (TVS/ESD)
README
README.mdWBLNA
Wide Bandwidth low noise amplifier 20Hz-20MHz 20/40dB
The WBLNA is a low noise high bandwidth amplifier board. It can be use to many purpose as noise measurement.
Specs are :
- 20Hz to 20MHz -3dB bandwidth
- +20dB and +40dB gain individual outputs
- 50 Ohms input/output impedance
- AC or DC coupled input (support +/-20V in AC coupled mode).
- Single 12V@50mA DC input jack
- Low overall cost (~30€ of parts + PCB).
This project is open source and has been designed using Kicad 5.0.2 The Githu repos include all design files like :
- LTspice simulation files and results
- Schematics
- Bill of materials with Mouser order code
- Picture of prototype
- Pulse mesurements
- Mechanical drawing
- And more...
Frex
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF/25V X7R | Capacitor_SMD:C_0603_1608Metric | C7, C9, C11, C15, C17 |
| 4 | 10nF/25V X7R | Capacitor_SMD:C_0603_1608Metric | C6, C10, C14, C18 |
| 4 | 49.9 | Resistor_SMD:R_0805_2012Metric | R1, R4, R7, R8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R10, R13 |
| 3 | BNC | WBLNA:BNC_edge_solderSMD | J1, J6, J7 |
| 2 | 10pF/COG | Capacitor_SMD:C_0805_2012Metric | C8, C16 |
| 2 | 220uF/20V OSCON | Capacitor_SMD:CP_Elec_8x6.9 | C2, C12 |
| 2 | 22uF/10V X7R | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 270pF/COG | Capacitor_SMD:C_0805_2012Metric | C5, C13 |
| 2 | 39.2 | Resistor_SMD:R_0805_2012Metric | R3, R6 |
| 2 | 499 | Resistor_SMD:R_0805_2012Metric | R2, R5 |
| 2 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | LT6200CS8-10#PBF | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 100nF/25V X7R | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1nF/50V COG 2% | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 4.99k | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | AD8510ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | Case_1590LLB_Hammond | WBLNA:1590LLB | BOX1 |
| 1 | Jack-DC | WBLNA:BarrelJackSMD_Wurth_694108106102 | J2 |
| 1 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Led 3mm green | LED_THT:LED_D3.0mm_Clear | D4 |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D3 |
| 1 | P4SMA12A | Diode_SMD:D_SMA | D2 |
Questions
How big is the WBLNA PCB?
It measures 33 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WBLNA use?
47 parts, built around the LT6200CS8-10#PBF, AD8510ARZ, BAT54S and MBR0540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WBLNA KiCad files?
From the OneAudio/WBLNA repository on GitHub, at the commit this page was made from: the board is _WBLNA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WBLNA design in my own project?
Its repository states no licence, so its author keeps all rights: ask OneAudio before reusing the design.
Similar boards
- 4 layers160 × 90 mm
VESC controller
paltatech/VESC-controller
Made open source with KiCAD, an open source EDA tool.
342 parts356 - 4 layers138.1 × 104.6 mm
V7-kaleido
vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
140 parts75CC-BY-SA-4.0 - 6 layers140 × 100 mm
- 2 layers120 × 66 mm
Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 2 layers51 × 71 mm
- 2 layers45 × 45 mm
- 2 layers76.6 × 141.1 mm
Oniondao badge
OnionDAO-git/oniondao-badge
An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…
190 parts17