Skip to the content
2 layers208.4 × 36.1 mmSignal conditioning top, the printed circuit board in 3D

2-layer analogue front end (AFE) signal conditioning pipeline made in KiCad, and simulated in LTspice. This design target an audio application

Size
208.4 × 36.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
82
Nets
72
Pads
299
Tracks, vias
596, 130
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Oct 2026
Updated
16 Oct 2026

Overview

Signal conditioning top is an open-source printed circuit board by omarothman2004, from the omarothman2004/Signal-Conditioning-Pipeline repository on GitHub, published under the MIT licence. It is a 2-layer board of 208.4 × 36.1 mm with 82 parts on 72 nets, routed with 596 tracks and 130 vias.

It is built around the ADA4084-2ACPZ-R7 and BAV99. Its parts include 28 capacitors, 20 resistors, 3 connectors, 2 diodes and 1 IC.

Main components

2

README

README.md

Signal Conditioning Pipeline

Overview

A comprehensive project documenting the design, simulation, and physical layout of an analogue signal conditioning circuit. It bridges theoretical modeling with hardware implementation.

Design Workflow

  1. Simulation: Frequency and transient response modeling verified in LTspice.
  2. Schematic Capture: Component selection and schematic design in KiCad.
  3. Layout: Low-noise PCB routing focusing on ground planes and trace separation.

Repository Structure

  • /simulation: LTspice simulation files (.asc) and plots.
  • /hardware: KiCad schematic and PCB layout files.
  • /outputs: Gerber files and manufacturing documentation.

Parts

82
QtyValueFootprintReferences
1410kResistor_SMD:R_0805_2012MetricR3, R4, R5, R6, R7, R8, R13, R14, R15, R16, R17, R18, RDIV1, RDIV2
12100nCapacitor_SMD:C_0201_0603MetricC1, C4, C5, C8, C9, C12, C17, C18, C22, C23, C24, C28
810uCapacitor_SMD:C_0201_0603MetricC2, C3, C6, C7, C10, C11, C25, C27
6ADA4084-2ACPZ-R7footprints:CP_8_12_ADIBUFF1, BUFF2, DIFF1, U1, U2, U3
410Resistor_SMD:R_0805_2012MetricR11, R12, R19, R20
4100Resistor_SMD:R_0805_2012MetricRcm1, Rcm2, Rdiff1, Rdiff2
424.9kResistor_SMD:R_0805_2012MetricRf1, Rf2, Rin1, Rin2
4TestPointTestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mmTP1, TP2, TP3, TP8
4~TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mmTP4, TP5, TP6, TP7
210pCapacitor_SMD:C_0201_0603MetricCComp1, CComp2
2220nCapacitor_SMD:C_0805_2012MetricC15, C16
2220pCapacitor_SMD:C_0805_2012MetricC13, C14
227kResistor_SMD:R_0805_2012MetricR9, R10
2BAV99Package_TO_SOT_SMD:Diodes_SOT-553D1, D2
1100pCapacitor_SMD:C_0805_2012MetricCrf1
1150pCapacitor_SMD:C_0805_2012MetricC21
14.7uCapacitor_SMD:C_0201_0603MetricCref1
1499Resistor_SMD:R_0805_2012MetricRg1
150Resistor_SMD:R_0805_2012MetricRs1
150nCapacitor_SMD:C_0805_2012MetricC26
1680pCapacitor_SMD:C_0805_2012MetricC20
1820pCapacitor_SMD:C_0805_2012MetricC19
1AD4695Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mmU4
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1VCMConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1VMICConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2

Similar boards

  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 4 layers93.2 × 62.4 mmCompute module, the printed circuit board in 3D

    Compute module

    magkopian/raspberry-pi-compute-module-base-board

    Base board for the Raspberry Pi Compute Module

    66 parts214GPL-3.0
  • 4 layers65 × 56 mmEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    112 parts163GPL-2.0
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 4 layers87.1 × 78.2 mm3 in 1 Panel, the printed circuit board in 3D

    3 in 1 Panel

    kelu124/pic0rick

    An rp2040-based acquisition board for pulse-echo ultrasound

    115 parts116
  • 2 layers170.1 × 96.9 mmSmartPrintCoreH7x, the printed circuit board in 3D

    SmartPrintCoreH7x

    BoltzRnD/SmartPrintCoreH7x

    STM32H7 based Robust and Open Source 3D Printer Mainboard

    567 parts89
  • 4 layers43.4 × 25.4 mmR820t2 breakout, the printed circuit board in 3D

    R820t2 breakout

    emeb/r820t2

    Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip

    83 parts85
  • 4 layers62.5 × 83.8 mmKerberos2, the printed circuit board in 3D

    Kerberos2

    FrankBuss/kerberos

    C64/C128 MIDI flash interface

    169 parts81

Questions

How big is the Signal conditioning top PCB?

It measures 208.4 × 36.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Signal conditioning top use?

82 parts, built around the ADA4084-2ACPZ-R7 and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Signal conditioning top KiCad files?

From the omarothman2004/Signal-Conditioning-Pipeline repository on GitHub, at the commit this page was made from: the board is kicad/signal_conditioning_top.kicad_pcb and its schematic kicad/schematics/conditioning_adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Signal conditioning top design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).