
Mother
okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

MIDI mallet controller for marimba/other keyboard percussion players
Display is an open-source printed circuit board by okemessi, from the okemessi/midimalletg repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board with 14 parts on 37 nets, routed with 105 tracks and 19 vias.
It is built around the TBD62783APG and ULN2803A. Its parts include 4 capacitors, 4 connectors, 3 resistors and 3 ICs. It belongs with the keyboards and input and audio and music boards and the PIC boards of this library.
Wiki: https://github.com/okemessi/midimalletg/wiki
Midimalletg is a MIDI mallet controller for marimba/other keyboard percussion players. This project is developed as a hobby and personal project by okemessi. It is provided as-is because it is still under development.
Detailed specifications will be added to the wiki page (https://github.com/okemessi/midimalletg/wiki) as they become available.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C3 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10 |
| 2 | Conn_01x07_Female | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J1, J4 |
| 1 | 0.01u | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Conn_PIC_ICSP_ICD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | PIC16F18854-SO | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | TBD62783A | Package_DIP:DIP-18_W7.62mm | U3 |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U1 |

okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players
/fader.kicad_pcb.jpg?size=s&soon)
okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players

julianschick/flipdot-brose
Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.

Alli-Ekundayo/scpt-rl
SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:

hmcty/microwave
All software and hardware for running the microwave food simulator.


CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels



maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
14 parts, built around the TBD62783APG and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the okemessi/midimalletg repository on GitHub, at the commit this page was made from: the board is Circuit/old/DisplayController/Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).