

Open source repository for storing the files for the RP235X-B Evaluator, an RP235X-B Evaluation board.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 87
- Pads
- 356
- Tracks, vias
- 1,515, 187
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Aug 2024
- Updated
- 12 Aug 2024
Overview
RP235X FPGA is an open-source printed circuit board by Oak-Development-Technologies, from the Oak-Development-Technologies/RP235X-B-Evaluator repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 50 × 50 mm with 86 parts on 87 nets, routed with 1,515 tracks and 187 vias.
It is built around the W25Q128JWPIM, TLV75533PDBV and SK6812MINI-E. Its parts include 25 capacitors, 16 resistors, 6 ICs, 5 connectors and 3 diodes. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
3W25Q128JWPIM
WSON-8(5x6)-40℃~+85℃ 1.7V~1.95V 100,000 cycles 128Mbit 133MHz 20 Years 3ms SPI WSON-8(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHTLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.md
# RP235X-B-Evaluator
Open source repository for storing the files for the RP235X-B Evaluator, an RP235X-B Evaluation board.
Schematic
Here's the first page of the schematic:
Find the full PDF of the Schematic here:
Mind the name of the files, there is plans to eventually add an FPGA add on board for this. Stay tuned! :)
More Coming Soon!
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C6, C10, C11, C12, C13, C14, C15, C16, C17, C20, C23, C24, C25 +3 |
| 5 | 0 | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric | R2, R3, R16 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | DF40C-30DP-0.4V51 | CONN_HIROSE:SOIC_0DP-0.4V51_HIR | U3, U4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW2, SW3 |
| 2 | W25Q128JWPIM | w25q128:W25Q128JW_WSON 6x5-mm_WIN | U5, U6 |
| 1 | 12MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 2M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 953 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5 |
| 1 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x22_Socket | Connector_FFC-FPC:Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal | J3 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | G*** | kibuzzard-66B63D92 | kibuzzard-66B63D92 |
| 1 | G*** | kibuzzard-66B63D0B | kibuzzard-66B63D0B |
| 1 | G*** | kibuzzard-66B63D82 | kibuzzard-66B63D82 |
| 1 | G*** | kibuzzard-66B66391 | kibuzzard-66B66391 |
| 1 | G*** | kibuzzard-66B65044 | kibuzzard-66B65044 |
| 1 | G*** | kibuzzard-66B63CFB | kibuzzard-66B63CFB |
| 1 | G*** | kibuzzard-66B69604 | kibuzzard-66B69604 |
| 1 | G*** | kibuzzard-66B650E6 | kibuzzard-66B650E6 |
| 1 | G*** | kibuzzard-66B63CDC | kibuzzard-66B63CDC |
| 1 | G*** | kibuzzard-66B694FA | kibuzzard-66B694FA |
| 1 | G*** | kibuzzard-66B63D3D | kibuzzard-66B63D3D |
| 1 | G*** | kibuzzard-66B6616B | kibuzzard-66B6616B |
| 1 | G*** | kibuzzard-66B65027 | kibuzzard-66B65027 |
| 1 | G*** | kibuzzard-66B63D2E | kibuzzard-66B63D2E |
| 1 | G*** | kibuzzard-66B63DAC | kibuzzard-66B63DAC |
| 1 | G*** | kibuzzard-66B6615E | kibuzzard-66B6615E |
| 1 | G*** | kibuzzard-66B695F4 | kibuzzard-66B695F4 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | L_Small | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-3012 | L1 |
| 1 | MountingHole_Pad | Symbol:KiCad-Logo2_5mm_SilkScreen | H5 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | RP235x-B | Package_DFN_QFN:QFN-80_EP_10.573x10.573_Pitch0.4mm | U1 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 83 most common of 86 parts.
Similar boards
- 2 layers303.6 × 94.1 mm

- 4 layers100 × 70 mm

- 2 layers59 × 20 mm

- 4 layers33.8 × 38 mm

- 4 layers37 × 34.3 mm

Readout 60pin
opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.
55 parts92MIT - 2 layers80 × 50 mm

Greaseweazle F7 Plus V2
aerobaticant/Greaseweazle-F7-Plus
My board design for Keir Fraser's Greaseweazle
66 parts30 - 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 6 layers56.1 × 88 mm

Bldc&foc motor controller
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.
108 parts16
Questions
How big is the RP235X FPGA PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RP235X FPGA use?
86 parts, built around the W25Q128JWPIM, TLV75533PDBV and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP235X FPGA KiCad files?
From the Oak-Development-Technologies/RP235X-B-Evaluator repository on GitHub, at the commit this page was made from: the board is Hardware/RP235X_FPGA.kicad_pcb and its schematic Hardware/RP235X_FPGA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP235X FPGA design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).