

TachoSensor SMD
- Size
- 21.5 × 12 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 16
- Tracks, vias
- 30, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Dec 2025
- Updated
- 20 Feb 2026
Overview
TachoSensor SMD is an open-source printed circuit board by Numata-wasa, from the Numata-wasa/Tachometer repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.5 × 12 mm with 8 parts on 5 nets, routed with 30 tracks and 1 via.
It is built around the RPR-220. Its parts include 2 resistors, 1 capacitor, 1 IC, 1 diode and 1 connector.
Main components
1README
README.mdtachometer
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C101 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | LOGO | Library:wasa_10mm | G*** |
| 1 | OUT | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J101 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D101 |
| 1 | RPR-220 | Library:RPR220 | U101 |
| 1 | ~ | WOBCLibrary:Board_1U_60x60 | B101 |
More from Numata-wasa/Tachometer
2- 2 layers48 × 72 mm

- 2 layers30 × 15 mm

Similar boards
- 2 layers130.1 × 169.3 mm

- 2 layers22.5 × 62 mm

- 2 layers151.1 × 176.3 mm

- 2 layers90 × 40 mm

- 2 layers99.6 × 77 mm

- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k
Questions
How big is the TachoSensor SMD PCB?
It measures 21.5 × 12 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TachoSensor SMD use?
8 parts, built around the RPR-220. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TachoSensor SMD KiCad files?
From the Numata-wasa/Tachometer repository on GitHub, at the commit this page was made from: the board is haradware/TachoSensor/TachoSensor_SMD/TachoSensor_SMD.kicad_pcb and its schematic haradware/TachoSensor/TachoSensor/TachoSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TachoSensor SMD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).