2 layers96 × 86 mm
2 layers122.4 × 108 mm
Uno PH2.0 ExternBoardV3.1
nulllaborg/ph2.0_sensors1- Size
- 122.4 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 29
- Pads
- 141
- Tracks, vias
- 519, 65
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 May 2022
- Updated
- 11 May 2022
Overview
Uno PH2.0 ExternBoardV3.1 is an open-source printed circuit board by nulllaborg, from the nulllaborg/ph2.0_sensors repository on GitHub. It is a 2-layer board of 122.4 × 108 mm with 32 parts on 29 nets, routed with 519 tracks and 65 vias.
It is built around the ARDUINO UNO R3 and NRF24L01P-R. Its parts include 19 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Edge_Con3 | DIP:DIP-PH2.00mm-3A | J1, J2, J4, J5, J7, J8, J10, J11 |
| 2 | 4pin | DIP:DIP-PH2.00mm-4A | J6, J9 |
| 2 | Edge_Con4 | DIP:DIP-PH2.00mm-4A | J3, J16 |
| 2 | Edge_Con5 | SMD:SMD-Horizontal-PH2.00mm-5P | J12, J14 |
| 2 | Edge_Con6 | SMD:SMD-Horizontal-PH2.00mm-6P | J13, J15 |
| 2 | I2C | DIP:DIP-PH2.00mm-4A | J19, J20 |
| 1 | 10uF | SMD:C_0603 | C1 |
| 1 | ArduinoUnoR3 | DIP:ArduinoUnoR3 | U1 |
| 1 | JACK_CAP | SMD:SMD-2.54mm-Pitch-3P | J17 |
| 1 | Servo*2 | SMD:SMD_3x2P_2.54mm | JP3 |
| 1 | Ultrasoud | SMD:SMD-2.54mm-Pitch-4P | JP2 |
| 1 | nRF24L01+ | DIP:DIP-1.5Hole-2.54mm-Pitch-4Px2 | JP1 |
The 24 most common of 32 parts.
More from nulllaborg/ph2.0_sensors
3- 2 layers158 × 102.2 mm
- 2 layers122.4 × 108 mm
Similar boards
- 2 layers56.5 × 53.9 mm
Controller v1
ARTS-Laboratory/SCUWLS
UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism
18 parts3CC-BY-SA-4.0 - 2 layers
- 4 layers40 × 50 mm
- 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 2 layers40.6 × 78.5 mm
Brooklyn
ARTS-Laboratory/DOVE
DOVE: Dynamics Observation and Vibration at the Edge. A deployable sensor package for vibration-based structural health monitoring.
39 parts4CC-BY-SA-4.0 - 2 layers50 × 90 mm
Pods
desertkun/pods
Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.
32 parts4 - 2 layers21.6 × 48.3 mm
RF Arduino Pro Mini
etimou/Arduino-RF-Pro-Mini
Arduino Pro Mini + nRF24L01P = Arduino-RF-Pro-Mini
43 parts4 - 2 layers75.9 × 72.4 mm
OpenDTU
plewka/ESP-Solar_OpenDTU
PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...
46 parts4GPL-3.0
Questions
How big is the Uno PH2.0 ExternBoardV3.1 PCB?
It measures 122.4 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uno PH2.0 ExternBoardV3.1 use?
32 parts, built around the ARDUINO UNO R3 and NRF24L01P-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uno PH2.0 ExternBoardV3.1 KiCad files?
From the nulllaborg/ph2.0_sensors repository on GitHub, at the commit this page was made from: the board is others/Uno_PH2.0_ExternBoardV3.1/Uno_PH2.0_ExternBoardV3.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uno PH2.0 ExternBoardV3.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask nulllaborg before reusing the design.