
Rioctrl controller
festlv/rioctrl-hw
Hardware design for modular CNC controller

Inverting buck boost
Negative power supply is an open-source printed circuit board by nullcrimson, from the nullcrimson/negative-power-supply repository on GitHub. It is a 2-layer board of 40 × 25 mm with 26 parts on 10 nets, routed with 30 tracks and 44 vias.
It is built around the TPS54335ADDAR and SS14. Its parts include 13 capacitors, 6 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 22uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C4, C8, C9, C10, C11 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1, J2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 1.8k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22uH | Inductor_SMD:L_KOHERelec_MDA7030 | L1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | SS14 | Diode_SMD:D_SOD-323 | D1 |
| 1 | TPS54335ADDAR | footprints:IC_TPS54335ADDAR | U1 |

festlv/rioctrl-hw
Hardware design for modular CNC controller


JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32



execuc/u2if
USB to interfaces implementing MicroPython "machine" module functionalities on a computer.
It measures 40 × 25 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the TPS54335ADDAR and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nullcrimson/negative-power-supply repository on GitHub, at the commit this page was made from: the board is negative_power_supply.kicad_pcb and its schematic negative_power_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nullcrimson before reusing the design.