2 layers65 × 56 mm
Rascsi 2p5
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
98 partsBSD-3-Clause
2 layers65 × 34 mm
Ctrl board
nucleogenic/RASCSIPlease check out the full story with much more detail on the wiki!
- Size
- 65 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 50
- Pads
- 135
- Tracks, vias
- 240, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Jul 2022
- Updated
- 4 Dec 2022
Overview
Ctrl board is an open-source printed circuit board by nucleogenic, from the nucleogenic/RASCSI repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 65 × 34 mm with 35 parts on 50 nets, routed with 240 tracks and 33 vias.
It is built around the M2.5. Its parts include 13 resistors, 5 connectors, 3 switches, 1 capacitor and 1 IC.
Main components
1README
README.mdWhat is RaSCSI?
RaSCSI is a virtual SCSI device emulator that runs on a Raspberry Pi. It runs in userspace, and can emulate several SCSI devices at one time. There is a control interface to attach / detach drives during runtime, as well as insert and eject removable media. This project is aimed at users of vintage Macintosh and Atari computers and more (see compatibility list) from the 1980's and 1990's.
Please check out the full story with much more detail on the wiki!
How do I contribute?
RaSCSI is using the Gitflow Workflow. A quick overview:
- The master branch should always reflect the contents of the last stable release
- The develop branch should contain the latest tested & approved updates. Pull requests should be used to merge changes into develop.
- The rest of the feature branches are for developing new features
- A tag will be created for each "release". The releases will be named . (for the first release of the month). Hot fixes, if necessary, will be released as ... For example, the first release in January 2021 will be release "21.01". If a hot-fix is needed for this release, the first hotfix will be "21.01.1".
Typically, releases will only be planned every few months.
Github Sponsors
Thank you to all of the Github sponsors who support the development community!
Special thank you to the Gold level sponsors!
Special thank you to the Silver level sponsors!
- @stinkerton18
- @hsiboy
- Private sponsor ;]
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 3 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | Pi Logo | mousebites:pi_logo | G1, G2 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Aux GPIO Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | DogCow | mousebites:dogcow | G4 |
| 1 | KiCad Logo | Symbol:KiCad-Logo2_5mm_SilkScreen | G3 |
| 1 | OLED Connector | mousebites:0.9_and_1.3_in_OLED_Footprint | J2 |
| 1 | PCA9554APW,118 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | RaSCSI Connector | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP4 |
More from nucleogenic/RASCSI
7- 2 layers65 × 56 mm
Rascsi 2p3
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
94 partsBSD-3-Clause - 2 layers65 × 56 mm
Rascsi 2p2
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
91 partsBSD-3-Clause - 2 layers65 × 30 mm
Rascsi zero
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
89 partsBSD-3-Clause - 2 layers65 × 73.7 mm
Rascsi din
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
43 partsBSD-3-Clause - 2 layers64.5 × 29.9 mm
Loopback tester
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
15 partsBSD-3-Clause - 2 layers65 × 21.2 mm
Daisy chain board
nucleogenic/RASCSI
Please check out the full story with much more detail on the wiki!
9 partsBSD-3-Clause
Similar boards
- 2 layers40.9 × 85 mm
Studio mic
Spirit532/studio_mic
A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone
63 parts150MIT - 2 layers65 × 56 mm
- 2 layers65 × 56 mm
ClumsyMIDI
gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display
26 parts90CC-BY-SA-4.0 - 6 layers203 × 151.8 mm
PDNode Baseboard
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
236 parts86AGPL-3.0 - 4 layers60 × 127 mm
- 2 layers85 × 56.5 mm
- 4 layers70 × 60 mm
Marelleo
Zebra-Rodeo/marelleo
Une boîte qui raconte une histoire quand on pose une figurine dessus. Boîtier, carte, micrologiciel et doc pour la refaire.
57 parts47 - 2 layers285.8 × 124.6 mm
Punk75
dsanchezseco/punk75
Ortholinear keyboard with 75 keys and all components through hole
194 parts44GPL-3.0
Questions
How big is the Ctrl board PCB?
It measures 65 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ctrl board use?
35 parts, built around the M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ctrl board KiCad files?
From the nucleogenic/RASCSI repository on GitHub, at the commit this page was made from: the board is hw/ctrl_board_v1p5/ctrl_board.kicad_pcb and its schematic hw/ctrl_board_v1p5/ctrl_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ctrl board design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).