Skip to the content
2 layers100 × 99 mmScsiemu, the printed circuit board in 3D

Level Converters for SCSI-bus Emulators

Size
100 × 99 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
127
Pads
420
Tracks, vias
1,034, 294
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 May 2020
Updated
6 Jun 2021

Overview

Scsiemu is an open-source printed circuit board by novi, from the novi/scsiemu-pcb repository on GitHub. It is a 2-layer board of 100 × 99 mm with 64 parts on 127 nets, routed with 1,034 tracks and 294 vias.

It is built around the TL2218-285PW, 2SC2712 and DMG3415U. Its parts include 11 capacitors, 8 ICs, 8 connectors, 7 resistors and 4 diodes.

Main components

3

README

README.md

Level Converters for SCSI-bus Emulators

This device enables you to convert logic levels between SCSI-bus and Raspberry-Pi GPIOs.

  • Combine with Raspberry Pi Zero
  • Supports Target(=e.g. Behaves as SCSI hard-disk) mode
  • Supports Initiator, Host(=Dump data from SCSI hard-disk etc...) mode

NOTE: Some features are depends on your SCSI emulation software.

Compatible SCSI-bus Emulation Software

Gerbers and BOM(Parts List)

  • Gerber: scsiemu-gerber/
  • BOM: scsiemu-bom.csv

Related Projects

License

Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)

Parts

64
QtyValueFootprintReferences
6HDD MountMountingHole:MountingHole_3.5mmMH5, MH6, MH7, MH8, MH11, MH12
6Raspi MountMountingHole:MountingHole_2.2mm_M2MH1, MH2, MH3, MH4, MH9, MH10
510uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC5, C6, C8, C10, C11
40.1uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2, C3, C4
410kResistor_SMD:R_Cat16-8RN1, RN2, RN3, RN4
474LS641-1Package_SO:SO-20_12.8x7.5mm_P1.27mmU1, U2, U3, U4
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R7
21kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R4
22.2uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC7, C9
22SC2712Package_TO_SOT_SMD:SOT-23_HandsolderingQ2, Q3
2DS2105ZPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU5, U6
2NFM21 0.22ucd_device:NFM21PCFL1, FL2
2POWER 5VConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4, J5
2SBDlocal_lib:D_SOD-123_HandSolderingD1, D2
2TL2218-285Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU7, U8
12.2kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2
12.7kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
12A (0685T2000-01)Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF2
147kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
1750mA ~~ 1A (0ZCJ0075FF2E)Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
1AT Power 5V (171826-4)local_lib:Molex_171826-4J6
1AT Power 5V (641737-1)local_lib:TE_641737-1J8
1DMG3415UPackage_TO_SOT_SMD:SOT-23_HandsolderingQ1
1I2C ExtConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ7
1Internal TerminatorConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1LED ACTLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderLED2
1LED PWRLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderLED1
1Power No Switch JMPJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1RasPiConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1SCSIConnector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_HorizontalJ2
1USB_POWERcd_device:USB_ZX62R-B-5P_HandSolderingJ3
1Use Raspi Power OffJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2

Similar boards

  • 2 layers132 × 94 mmHelix niz, the printed circuit board in 3D

    Helix niz

    ginjake/ec_helix_build

    商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake

    200 parts40
  • 2 layers91 × 55 mmSunmeishi, the printed circuit board in 3D

    Sunmeishi

    MakotoKurauchi/sunmeishi

    44 parts7MIT
  • 4 layers129 × 121 mmMinyasX Combined, the printed circuit board in 3D

    MinyasX Combined

    kunichiko/X68k-MinyasX

    MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。

    232 parts2MIT
  • 2 layers65 × 56 mmROBOONE Auto RaspiHAT, the printed circuit board in 3D

    ROBOONE Auto RaspiHAT

    22-soeda/ROBOONE-Auto-RaspiHAT

    KiCad design for ROBOONE Automatic RaspberryPi HAT

    43 parts
  • 4 layers45.2 × 47.2 mmHdmi2mipi, the printed circuit board in 3D

    Hdmi2mipi

    badgeteam/hdmi2mipi

    This board design is a work in progress, use at your own risk.

    99 parts
  • 2 layers95 × 72 mmESP32 SMD, the printed circuit board in 3D

    ESP32 SMD

    syamei0/kicad

    仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ

    118 parts
  • 2 layers45 × 51 mmProgramming Studie Kit Option, the printed circuit board in 3D

    Programming Studie Kit Option

    s23c1130/CITERA_Programming_KIT

    文化祭等で頒布したCITERA Programming KITの書き込み用プログラムの説明です

    50 parts2
  • 2 layers95 × 72 mmESP32 SMD, the printed circuit board in 3D

    ESP32 SMD

    syamei0/Y.maku

    左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

    119 parts

Questions

How big is the Scsiemu PCB?

It measures 100 × 99 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Scsiemu use?

64 parts, built around the TL2218-285PW, 2SC2712 and DMG3415U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Scsiemu KiCad files?

From the novi/scsiemu-pcb repository on GitHub, at the commit this page was made from: the board is scsiemu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Scsiemu design in my own project?

Its repository states no licence, so its author keeps all rights: ask novi before reusing the design.