2 layers50 × 60 mm
2 layers68.4 × 81 mm
Debug board
NortheasternSatelliteLab/debug_boardAn attempt to be an universal debug board for all (or atleast most) of our boards in the future.
- Size
- 68.4 × 81 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 174
- Pads
- 507
- Tracks, vias
- 915, 155
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 23 Jul 2024
Overview
Debug board is an open-source printed circuit board by NortheasternSatelliteLab, from the NortheasternSatelliteLab/debug_board repository on GitHub. It is a 2-layer board of 68.4 × 81 mm with 103 parts on 174 nets, routed with 915 tracks and 155 vias.
It is built around the STM32F072RBH6, DMP3013SFV-7(ES) and CYPD3177-24LQXQ, with the FT2232HL, CC0603KRX7R9BB104 and 19-217/GHC-YR1S2/3T among its other parts. Its parts include 39 capacitors, 32 resistors, 12 ICs, 11 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
11
STM32F072RBH6
UFBGA-64-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 48MHz 51 ARM Cortex-M0 Built-in FLASH UFBGA-64 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
DMP3013SFV-7(ES)
PDFN-8L(3x3)PDFN-8L(3x3) MOSFETs ROHSElecSuperMOSFETs
CYPD3177-24LQXQ
TQFN-24TQFN-24-EP(4x4) Power Distribution Switches ROHSInfineon TechnologiesPower Distribution Switches
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorised
CC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
19-217/GHC-YR1S2/3T
0603-40℃~+85℃ 110mW 120° 199mcd 20mA 3.3V 518nm 520nm~535nm Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - DiscreteC0603C270J5GAC
060327pF 50V C0G ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTPMEG045V100EPE-QZ
TO-2771 Independent 10A 300A 45V 490mV@10A 600uA@45V TO-277 Schottky Diodes ROHSNexperiaSchottky Diodes
ABM3B-24.000MHZ-B2-T
SMD5032-4P-20℃~+70℃ 18pF 24MHz 50Ω Crystal Oscillator ±20ppm ±50ppm SMD5032-4P Crystals ROHSAbraconCrystals
ABM8-12.000MHZ-20-B1U-T
SMD3225-4P-20℃~+70℃ 120Ω 12MHz 20pF ±10ppm ±10ppm SMD3225-4P Crystals ROHSAbraconCrystals
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C6, C21, C26, C27, C28, C29, C30, C31, C32, C33, C34, C43 |
| 7 | 100R | Resistor_SMD:R_0603_1608Metric | R31, R32, R33, R34, R35, R36, R37 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric | R10, R12, R21, R22, R23, R24, R25 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D2, D8, D9, D10, D11, D12 |
| 5 | 100nf | Capacitor_SMD:C_0603_1608Metric | C19, C38, C39, C40, C44 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R9, R15, R16, R20 |
| 4 | 10nf | Capacitor_SMD:C_0603_1608Metric | C45, C46, C47, C48 |
| 4 | 27pF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C20, C22 |
| 4 | DMP3013SFV-7 | SamacSys_Parts:DMP3036SFV7 | IC4, IC5, IC6, IC7 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C10, C52 |
| 3 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25 |
| 2 | 12k | Resistor_SMD:R_0603_1608Metric | R8, R18 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C50, C51 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R11, R13 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 56k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | PMEG045V100EPE-QZ | SamacSys_Parts:PMEG045V100EPEQZ | D5, D6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3, SW4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 15V | SamacSys_Parts:SODFL2513X100N | D4 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 24V | Diode_SMD:D_SOD-323_HandSoldering | D3 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 3.3uF,15V | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 93LCxxB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ABM3B-24.000MHZ-B2-T | SamacSys_Parts:ABM3B | Y3 |
| 1 | CYPD3177-24LQXQ | SamacSys_Parts:QFN50P400X400X60-25N-D | IC3 |
| 1 | Conn_02x13_Row_Letter_Last | Connector_Samtec_HSEC8:Samtec_HSEC8-113-X-X-DV_2x13_P0.8mm_Edge | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | FT2232HL | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | LMS1585AISX-3.3_NO | SamacSys_Parts:KTT0003B | IC10 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | STM32F072RBH6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TCAN3413DRBR | SamacSys_Parts:SON65P300X300X100-9N-D | IC1 |
| 1 | TLV74018PDBVR | SamacSys_Parts:SOT95P280X145-5N | IC2 |
| 1 | USB2514B_Bi | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U2 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USB_C_Receptacle_PowerOnly_24P | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J2 |
Questions
How big is the Debug board PCB?
It measures 68.4 × 81 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Debug board use?
103 parts, built around the STM32F072RBH6, DMP3013SFV-7(ES), CYPD3177-24LQXQ and FT2232HL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debug board KiCad files?
From the NortheasternSatelliteLab/debug_board repository on GitHub, at the commit this page was made from: the board is debug_board.kicad_pcb and its schematic STM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debug board design in my own project?
Its repository states no licence, so its author keeps all rights: ask NortheasternSatelliteLab before reusing the design.
Similar boards
- 6 layers30 × 60 mm
LSR FLCM0001 A03
Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.
150 partsMIT - 2 layers48.4 × 52.1 mm
- 4 layers100 × 68 mm
- 4 layers
CABadge V2 1
nbtca/CABadge
CABadge 计协电子吧唧：基于 ESP32-S3 的开源圆屏互动徽章，支持动态壁纸、触摸交互、Wi-Fi/BLE 和趣味小应用，提供 PCB、3D 打印外壳、固件及配套工具。
110 parts15MIT - 4 layers40 × 40 mm
AeroHawk FC
sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB
76 parts1MIT - 4 layers100 × 90 mm
Opentouch s3
JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.
185 parts - 2 layers75.4 × 31.8 mm
LEC000042
LECTIX/LEC000042-Detecteur-de-presence-DCC-Analogique-1A
Fichiers sources pour le produit LEC000042
64 partsCERN-OHL-S-2.0