2 layers89 × 95 mm
2 layers72 × 70 mm
WaveGlideNG
nortd/WaveGlide5An open hardware oxygen system for glider pilots.
- Size
- 72 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 28
- Pads
- 99
- Tracks, vias
- 187, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Aug 2015
- Updated
- 19 Oct 2020
Overview
WaveGlideNG is an open-source printed circuit board by nortd, from the nortd/WaveGlide repository on GitHub. It is a 2-layer board of 72 × 70 mm with 24 parts on 28 nets, routed with 187 tracks and 0 vias.
It is built around the BMP280. Its parts include 4 resistors and 1 diode.
Main components
1README
README.mdWaveGlide Oxygen System
WaveGlide is an automatic oxygen delivery system for glider pilots. It prevents hypoxia at high altitudes by adding oxygen to the inhaled air. Unlike medical constant flow systems it pulses the oxygen supply at the beginning of the breathing cycle and automatically adapts oxygen levels to altitude.
For details see the Project Website.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | VALVECONN | WaveGlideNG:VALECONN | VALVECONN1, VALVECONN2 |
| 1 | 10 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 120 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 30 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 360 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | BAT+ | WaveGlideNG:VALECONN | BATCONN1 |
| 1 | BAT- | WaveGlideNG:VALECONN | BATCONN2 |
| 1 | BMP280 | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | BMP280 |
| 1 | D | Diodes_ThroughHole:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | FEATHERBLELONG | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | FEATHERBLELONG1 |
| 1 | FEATHERBLESHORT | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | FEATHERBLESHORT1 |
| 1 | PIEZOCONN | WaveGlideNG:PIEZO | PIEZOCONN1 |
| 1 | PROBEJACK | WaveGlideNG:DB9HARTING | PROBEJACK1 |
| 1 | PWRSWITCH | WaveGlideNG:TE_Switch | POWERSWITCH1 |
| 1 | PressSensor | WaveGlideNG:DIFFPRESS | DIFFPRESSURE1 |
| 1 | STATUSRGB | WaveGlideNG:RGBA_5mm | STATUSRGB1 |
| 1 | VALVESSR | WaveGlideNG:SSR | VALVESSR1 |
| 1 | YS2000PROBE | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | YS2000PROBE1 |
| 1 | YS2000UART | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | YS2000UART1 |
The 20 most common of 24 parts.
More from nortd/WaveGlide
1Similar boards
- 4 layers55 × 55 mm
RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers168.9 × 123.3 mm
OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
296 parts161CC0-1.0 - 2 layers37.8 × 21.5 mm
- 8 layers34 × 34 mm
OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 2 layers47.6 × 69.1 mm
Pico Drone
TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.
33 parts29Apache-2.0 - 2 layers55 × 90.8 mm
- 4 layers100 × 54 mm
- 2 layers115 × 115 mm
Questions
How big is the WaveGlideNG PCB?
It measures 72 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WaveGlideNG use?
24 parts, built around the BMP280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WaveGlideNG KiCad files?
From the nortd/WaveGlide repository on GitHub, at the commit this page was made from: the board is pcb/WaveGlideNG/WaveGlideNG.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WaveGlideNG design in my own project?
Its repository states no licence, so its author keeps all rights: ask nortd before reusing the design.