2 layers72 × 70 mm
2 layers89 × 95 mm
WaveGlide3X
nortd/WaveGlide5An open hardware oxygen system for glider pilots.
- Size
- 89 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 39
- Pads
- 157
- Tracks, vias
- 335, 9
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Aug 2015
- Updated
- 19 Oct 2020
Overview
WaveGlide3X is an open-source printed circuit board by nortd, from the nortd/WaveGlide repository on GitHub. It is a 2-layer board of 89 × 95 mm with 32 parts on 39 nets, routed with 335 tracks and 9 vias.
It is built around the BMP280 and KSC1815YTA. Its parts include 10 resistors, 2 capacitors, 1 diode and 1 transistor.
Main components
2
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
KSC1815YTA
TO-92-3L-55℃~+150℃ 1 NPN 100nA 150mA 250mV 400mW 50V 5V 70 80MHz NPN TO-92-3L Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdWaveGlide Oxygen System
WaveGlide is an automatic oxygen delivery system for glider pilots. It prevents hypoxia at high altitudes by adding oxygen to the inhaled air. Unlike medical constant flow systems it pulses the oxygen supply at the beginning of the breathing cycle and automatically adapts oxygen levels to altitude.
For details see the Project Website.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 2 | 100K | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | 100uF | Capacitors_ThroughHole:CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 360 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R8 |
| 2 | VALVESSR | WaveGlide3X:SSR | VALVESSR1, VALVESSR2 |
| 1 | 1.33K | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 10 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 120 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 30 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | AIRTEC | WaveGlide3X:Airtec_M20_B_1MH | AIRTEC1 |
| 1 | BATCONN | WaveGlide3X:BATCONN | BATCONN1 |
| 1 | BMP280 | WaveGlide3X:Adafruit_BMP280 | BMP280 |
| 1 | BOOSTCONV | WaveGlide3X:PTN04050CAD | BOOSTCONV1 |
| 1 | CHARGER | WaveGlide3X:Adafruit_Charger_4410 | CHARGER1 |
| 1 | D | Diodes_ThroughHole:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | Feather_M0_BLE | WaveGlide3X:Feather_M0_BLE | Feather_M0_BLE1 |
| 1 | KSC1815 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
| 1 | PIEZOCONN | WaveGlide3X:PIEZO_17 | PIEZOCONN17 |
| 1 | PIEZOCONN | WaveGlide3X:PIEZO | PIEZOCONN1 |
| 1 | POWERSWITCH | WaveGlide3X:TE_Switch | POWERSWITCH1 |
| 1 | PROBEJACK | WaveGlide3X:DB9HARTING | PROBEJACK1 |
| 1 | PressSensor | WaveGlide3X:DIFFPRESS | DIFFPRESSURE1 |
| 1 | STATUSRGB | WaveGlide3X:RGBA_5mm | STATUSRGB1 |
| 1 | YS2000PROBE | WaveGlide3X:YS2000 | YS2000PROBE1 |
Questions
How big is the WaveGlide3X PCB?
It measures 89 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WaveGlide3X use?
32 parts, built around the BMP280 and KSC1815YTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WaveGlide3X KiCad files?
From the nortd/WaveGlide repository on GitHub, at the commit this page was made from: the board is pcb/WaveGlide3X/WaveGlide3X.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WaveGlide3X design in my own project?
Its repository states no licence, so its author keeps all rights: ask nortd before reusing the design.
More from nortd/WaveGlide
1Similar boards
- 6 layers180 × 110 mm
Reflow station
atwardzik/reflow_station_pcb
This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.
267 parts - 4 layers60.2 × 52.3 mm
- 4 layers55 × 55 mm
RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers168.9 × 123.3 mm
OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
296 parts161CC0-1.0 - 2 layers37.8 × 21.5 mm
- 8 layers34 × 34 mm
OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 2 layers47.6 × 69.1 mm
Pico Drone
TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.
33 parts29Apache-2.0 - 2 layers55 × 90.8 mm
