4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers70 × 70 mm
Tinywhoop frame
Norbi76/tinywhoop3Pentru a putea compila proiectele este necesara instalarea ESP IDF v6.0.2 !! Fiecare dintre cele 2 proiecte se va compila si scrie pe micro separat. Mediul de dezvolatare ESP IDF a fost utilizat pe Linux(Ubuntu).
- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 19
- Pads
- 65
- Tracks, vias
- 134, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Nov 2025
- Updated
- 9 Sep 2026
Overview
Tinywhoop frame is an open-source printed circuit board by Norbi76, from the Norbi76/tinywhoop3 repository on GitHub. It is a 2-layer board of 70 × 70 mm with 27 parts on 19 nets, routed with 134 tracks and 7 vias.
It is built around the 1N4148W. Its parts include 6 connectors, 4 resistors, 4 diodes, 4 transistors and 1 capacitor.
Main components
1README
README.mdAdresa repository: https://github.com/Norbi76/tinywhoop3.git
Pentru a putea compila proiectele este necesara instalarea ESP IDF v6.0.2 !! Fiecare dintre cele 2 proiecte se va compila si scrie pe micro separat. Mediul de dezvolatare ESP IDF a fost utilizat pe Linux(Ubuntu).
Pasii pentru compilare si scriere:
- cd ~/.espressif/v6.0.2/esp-idf
- . ./export.sh
- cd tinywhoop3/flight_controller/ sau cd tinywhoop3/telemetry_module/
- idf.py set-target esp32s3
- idf.py build flash monitor
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | Batt_conn_LIPO | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Batt_conn_MCU | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J6 |
| 1 | ESP_Unused_Pins1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESP_conn1 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | ESP_conn2 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
Questions
How big is the Tinywhoop frame PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tinywhoop frame use?
27 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tinywhoop frame KiCad files?
From the Norbi76/tinywhoop3 repository on GitHub, at the commit this page was made from: the board is tinywhoop_frame/tinywhoop_frame.kicad_pcb and its schematic documents/tinywhoop_sch/_restore_backup_2026-09-05T18-35-11-465/tinywhoop_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tinywhoop frame design in my own project?
Its repository states no licence, so its author keeps all rights: ask Norbi76 before reusing the design.
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
