Skip to the content
4 layers73.1 × 86.8 mmMarvinProjekt, the printed circuit board in 3D

MarvinProjekt

norahueppi/Marvin
Size
73.1 × 86.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
137
Nets
120
Pads
465
Tracks, vias
1,015, 222
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Sep 2024
Updated
11 Jun 2025

Overview

MarvinProjekt is an open-source printed circuit board by norahueppi, from the norahueppi/Marvin repository on GitHub. It is a 4-layer board of 73.1 × 86.8 mm with 137 parts on 120 nets, routed with 1,015 tracks and 222 vias.

It is built around the ESP32-S3-WROOM-1-N8, ES8388 and WS2812, with the DW01A, FS8205A and TPLP5907MFX-3.3 among its other parts. Its parts include 51 resistors, 44 capacitors, 13 ICs, 9 switches and 5 diodes. It belongs with the ESP32 boards of this library.

Main components

7

README

readme.md

Marvin Projekt

Introduction

Marvin is a attempt to recreate the moaning Doors from Hitchhikers Guide to the Galaxy

Features

  • ESP32-A1S Audio Module
  • Battery Powered
  • SD-Card Audio Storage
  • MP3 Capable

Documentation

Marvin Documentation

Markdown Cheat Sheet

Marvin_HW

Marvin_SW

Marvin_Docu

Parts

137
QtyValueFootprintReferences
1410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R17, R18, R22, R27, R33, R36, R37, R39, R40, R43, R44, R45, R46
910uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC6, C9, C10, C13, C14, C15, C21, C34, C36
80Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R25, R26, R28, R29, R30, R31, R32
8100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C23, C24, C26, C41, C42, C43, C44
70.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C7, C8, C16, C17, C18, C35
61uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C22, C27, C37, C38, C40
633Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R13, R14, R15, R19, R20
4100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R8, R9, R34
4WS2812LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmU9, U11, U12, U13
31MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR21, R24, R49
31kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR16, R35, R51
322uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC19, C20, C25
32kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R11, R42
3PRTR5V0U2X_1727-3884-6-NDPackage_TO_SOT_SMD:SOT-143_HandsolderingD1, D2, D3
21.5kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR38, R41
21.8kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR47, R50
220pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11, C12
2330pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC30, C31
25.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2BootLibrary:TasterSW2, SW9
2Q_PNP_Darlington_BCEPackage_TO_SOT_SMD:SOT-23-3Q1, Q2
2ResetLibrary:TasterSW1, SW8
10,1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC33
110nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC28
11nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC29
11uF, 25VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
12.5kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR48
13.3kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
133kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR23
1390pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC32
14.7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
147uFCapacitor_SMD:CP_Elec_6.3x5.9C39
14u7FCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
1BC817-40Package_TO_SOT_SMD:SOT-23Q3
1Battery_CellLibrary:BatteriehalterBT1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1DW01APackage_TO_SOT_SMD:SOT-23-6U5
1ES8388Package_DFN_QFN:QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mmU2
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1FS8205APackage_SO:TSSOP-8_4.4x3mm_P0.65mmU6
1Ferrite_Bead_SmallInductor_SMD:L_0805_2012MetricFB1
1GreenLED_SMD:LED_0805_2012MetricD5
1HM4056HPackage_SO:SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mmU7
1LOGOLibrary:Marivin_liegendG***
1LOGOLibrary:MarvinG***
1MP1720Library:MP1720U3
1Modi0Library:TasterSW6
1Modi1Library:TasterSW5
1OrangeLED_SMD:LED_0805_2012MetricD4
1SpeakerLibrary:LSLS1
1Switch Slide SPDT 100mA 12VLibrary:SWSW7
1TF_CARDLibrary:2096568U4
1TPLP5907MFX-3.3Package_TO_SOT_SMD:SOT-23-5_HandSolderingU8
1ToFLibrary:ToFU10
1USB3.1C16PFSMTLibrary:USB-C-SMD_TYPE-C-USB-17X1
1Volume+Library:TasterSW3
1Volume-Library:TasterSW4

The 133 most common of 137 parts.

Similar boards

  • 4 layers122 × 76 mmESP iRadio, the printed circuit board in 3D

    ESP iRadio

    hghaken/ESP-iRadio

    ESP32 internet radio with Bluetooth A2DP output (headphones/speaker), 1.69" display and web control

    122 partsGPL-3.0
  • 2 layers21.9 × 47.6 mmSimpleProg2.1 KiCAD, the printed circuit board in 3D

    SimpleProg2.1 KiCAD

    BiggiePete/SimpleProg2.1

    Simple Prog is a ST-LINK 2.1 esque programmer setup, using a simple PCB board, a 3d printed "clip" design, and a spring, the purpose of this is to intorduce an easier way to program boards, with cheaper footprints

    36 partsGPL-3.0
  • 2 layers100 × 103.5 mmHstat, the printed circuit board in 3D

    Hstat

    mckay27/hstat

    108 parts
  • 2 layers214 × 174 mmSoundBoxSTM32, the printed circuit board in 3D

    SoundBoxSTM32

    DominikNeugebauer/PCB

    All of my pcb projects i have made so far

    145 parts
  • 2 layers51.1 × 95 mmTalk e, the printed circuit board in 3D

    Talk e

    milovanpms/talk-e

    📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.

    75 parts4
  • 2 layers91.5 × 100 mmTrailmap, the printed circuit board in 3D

    Trailmap

    katetriestocode/trailmap

    this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)

    57 parts2
  • 2 layers64.5 × 120.5 mmX de link, the printed circuit board in 3D

    X de link

    Monacrylic/Pinscope-benchmark-circuits

    This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.

    122 parts2
  • 4 layers70.9 × 75 mmFlagshep Audio Player V1, the printed circuit board in 3D

    Flagshep Audio Player V1

    HYLDAIC/Flagshep-V1_Audio-Player

    A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

    77 parts1CERN-OHL-P-2.0

Questions

How big is the MarvinProjekt PCB?

It measures 73.1 × 86.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the MarvinProjekt use?

137 parts, built around the ESP32-S3-WROOM-1-N8, ES8388, WS2812 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MarvinProjekt KiCad files?

From the norahueppi/Marvin repository on GitHub, at the commit this page was made from: the board is 6_Semester/MarvinHW/KiCad/MarvinProjekt/MarvinProjekt.kicad_pcb and its schematic 6_Semester/MarvinHW/KiCad/MarvinProjekt/AudioCodec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MarvinProjekt design in my own project?

Its repository states no licence, so its author keeps all rights: ask norahueppi before reusing the design.