Skip to the content
2 layers152.1 × 36 mmESProbeScope3300, the printed circuit board in 3D

A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an…

Size
152.1 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
77
Nets
89
Pads
305
Tracks, vias
773, 102
Pours
368
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 May 2026
Updated
12 May 2026

Overview

ESProbeScope3300 is an open-source printed circuit board by noahensley, from the noahensley/kicad-probe-scope repository on GitHub, published under the MIT licence. It is a 2-layer board of 152.1 × 36 mm with 77 parts on 89 nets, routed with 773 tracks and 102 vias.

It is built around the ESP32-S2FN4R2, PAM8301AAF and XC8110AA01MR-G, with the MP2664GG-0000-Z, SKRPABE010 and B38G3RGB-10D0003H2U1930 among its other parts. Its parts include 26 capacitors, 23 resistors, 9 switches, 5 ICs and 3 diodes. It belongs with the ESP32 boards of this library.

Main components

9

README

README.md

ESProbeScope3300

A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an audio amplifier, an LCD interface, RGB status LEDs, and a multi-button probe input — all in a single compact design.


Project structure

text
kicad-probe-scope/
├── ESProbeScope3300.kicad_pcb   # PCB layout
├── ESProbeScope3300.kicad_sch   # Schematic
├── ESProbeScope3300.kicad_pro   # Project file
├── sym-lib-table                # Project-scoped symbol library table
│
├── libs/
│   ├── PartsLibrary3300.kicad_sym       # Symbol library
│   └── PartsLibrary3300.pretty/         # Footprint library
│       └── *.kicad_mod
│
├── fab/
│   ├── gerbers/                 # Copper, mask, silkscreen, edge cuts
│   ├── ESProbeScope3300-PTH.drl
│   ├── ESProbeScope3300-NPTH.drl
│   └── ESProbeScope3300-job.gbrjob
│
└── doc/
    ├── schematic.pdf
    └── bom.xlsx

Schematic

A PDF export of the schematic is available at doc/schematic.pdf for viewing without KiCad.


Key components

RefPartFunction
U1ESP32-S2FN4R2Main MCU with integrated 2.4 GHz Wi-Fi
ANT1Johanson 2450AT42B100E2.4 GHz chip antenna
J1GCT USB4110-GF-AUSB 2.0 Type-C connector
IC3MPS MP2664GGLi-ion battery charger
IC1, IC2XC8110AA01MR-GLDO voltage regulators
VR1ON Semi NCP114ASN330T1G3.3 V LDO
IC4PAM8301Class-D audio amplifier
LCD1Molex 527450897LCD flex connector
XTAL1EXS00A-CS14526Crystal oscillator
LED1, LED2B38G3RGB-10D0003H2U1930RGB status LEDs
S1–S8Alps SKRPABE010Tactile pushbuttons
SW1C&K JS102011SAQNSlide power switch
X3—Probe input header

Footprint and symbol libraries

All symbols and footprints are in libs/PartsLibrary3300.kicad_sym and libs/PartsLibrary3300.pretty/. Both are linked via ${KIPRJMOD} in sym-lib-table and the project footprint library table, so they resolve automatically when the project is opened in KiCad regardless of where it is cloned.

Footprints originate from the KiCad standard library, SnapEDA, and manufacturer-published CAD data (Johanson Technology, Walsin, Molex, GCT). Attribution is noted in the footprint description fields within the library files themselves.


License

MIT — see LICENSE.


Acknowledgements

  • KiCad EDA and the KiCad Libraries contributors
  • SnapEDA for component models
  • Johanson Technology, Walsin Technology, Molex, GCT, and other component manufacturers for publishing CAD data

Parts

77
QtyValueFootprintReferences
110.1uFPartsLibrary3300:CAP_0603_X_WALC1, C3, C5, C10, C12, C13, C14, C17, C18, C21, C22
710kPartsLibrary3300:RESC1607X60NR1, R2, R5, R16, R18, R19, R20
71kPartsLibrary3300:RESC1607X60NR6, R7, R8, R9, R10, R11, R12
51uFPartsLibrary3300:C_0603_1608MetricC6, C9, C11, C25, C26
5SKRPABE010PartsLibrary3300:SW_SKRPABE010S1, S2, S3, S4, S5
4100kPartsLibrary3300:RESC1607X60NR4, R15, R22, R23
210uFPartsLibrary3300:C_0805_2012MetricC2, C19
210uFPartsLibrary3300:CAP_GMC21_1.50H_CCEC7, C16
215pFPartsLibrary3300:CAP_0603_S_WALC4, C15
25.1kPartsLibrary3300:RESC1607X60NR13, R14
2B38G3RGB-10D0003H2U1930PartsLibrary3300:B38G3RGB-10D0003H2U1930_0606_RGB_LEDLED1, LED2
2XC8110AA01MR-GPartsLibrary3300:XC8110AA01MR-GIC1, IC2
10RPartsLibrary3300:RESC1608X55NR21
11.5nHPartsLibrary3300:IND_L-07C3N3SV6T_JOTL1
1100pFPartsLibrary3300:C_0603_1608MetricC8
11pFPartsLibrary3300:CAP_GMC02_CCEC23
122RPartsLibrary3300:RESC1607X60NR3
13.3nHPartsLibrary3300:L_0201_0603MetricL2
1300kPartsLibrary3300:RESC1608X55NR17
14.7uFPartsLibrary3300:CAPC1608X90NC20
1527450897PartsLibrary3300:CONN_527450897_MOLLCD1
1ANT_2450AT42B100EPartsLibrary3300:ANT_2450AT42B100E_JOTANT1
1Conn_01x02PartsLibrary3300:PinHeader_1x02_P2.00mm_VerticalX4
1DDZ9684Q-7PartsLibrary3300:D_SOD-123D1
1DNPPartsLibrary3300:C_0603_1608MetricC24
1ESP32-S2FN4R2PartsLibrary3300:ESP32-S2FN4R2_QFN56U1
1EXS00A-CS14526PartsLibrary3300:Crystal_SMD_WE_CFPX-180-4Pin_3.2x2.5mmXTAL1
1JS102011SAQNPartsLibrary3300:SW_JS102011SAQNSW1
1MOLEX 53047-02PartsLibrary3300:MOLEX_530470210J2
1MP2664GG-0000-ZPartsLibrary3300:QFN50P200X200X105-10NIC3
1NCP114ASN330T1GPartsLibrary3300:NCP114ASN330T1G_5-TSOPVR1
1PAM8301PartsLibrary3300:SOT-23-6IC4
1PROBEPartsLibrary3300:PinHeader_2x03_P1.27mm_VerticalX3
1SW_BOOTPartsLibrary3300:SW_SKRPABE010S7
1SW_PWRPartsLibrary3300:SW_SKRPABE010S8
1SW_RSTPartsLibrary3300:SW_SKRPABE010S6
1TESTPartsLibrary3300:PinHeader_2x02_P2.00mm_HorizontalX2
1USB4110-GF-APartsLibrary3300:USB4110-GF-AJ1

Similar boards

  • 2 layers62.7 × 44.4 mmDRM Watch v3, the printed circuit board in 3D

    DRM Watch v3

    drfailov/DRM_Watch_v3

    DRM Watch 3 - Наручний годинник з дисплеєм SHARP Memory LCD

    116 parts92GPL-3.0
  • 2 layers22 × 33 mmHomemade security key, the printed circuit board in 3D

    Homemade security key

    tobycm/homemade-security-key

    DIY a security key! powered by a rp2350 for a pretty good security :D

    46 parts2MIT
  • 2 layers85 × 56 mmFpga, the printed circuit board in 3D

    Fpga

    AriB2003/aero

    Olin Aero

    174 parts1
  • 4 layers17.8 × 20.7 mmQt py esp32-s2-assembled, the printed circuit board in 3D

    Qt py esp32-s2-assembled

    d4vid-le/qt-py-esp32-s2-experiment

    A personal, non-production experiment: reconstruct the Adafruit QT Py ESP32-S2 (Product 5325, Rev C) in KiCad from the authoritative Eagle source, measuring how accurately an AI agent can do it — and documenting every…

    47 parts
  • 4 layers16 × 47.5 mmSTM32C071G8Ux, the printed circuit board in 3D

    STM32C071G8Ux

    EmileBV/MCUEvalBoard_STM32C071G8Ux

    Small evaluation board for STM32C071G8Ux

    38 parts
  • 4 layers25 × 25 mmOpenPrint, the printed circuit board in 3D

    OpenPrint

    dac63701/OpenPrint

    52 parts
  • 4 layers87.2 × 22.6 mmSagittarius S1, the printed circuit board in 3D

    Sagittarius S1

    GeneralSyb/Sagittarius-Headtracker

    Project files for the Sagittarius S1 Prototype

    45 parts6MIT

Questions

How big is the ESProbeScope3300 PCB?

It measures 152.1 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESProbeScope3300 use?

77 parts, built around the ESP32-S2FN4R2, PAM8301AAF, XC8110AA01MR-G and MP2664GG-0000-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESProbeScope3300 KiCad files?

From the noahensley/kicad-probe-scope repository on GitHub, at the commit this page was made from: the board is ESProbeScope3300.kicad_pcb and its schematic ESProbeScope3300.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESProbeScope3300 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).