

Catch25-servo
- Size
- 41.5 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 18
- Pads
- 69
- Tracks, vias
- 113, 152
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jun 2025
- Updated
- 17 Jul 2025
Overview
Catch25-servo is an open-source printed circuit board by nn-lovers, from the nn-lovers/FE-IP-01 repository on GitHub. It is a 2-layer board of 41.5 × 65 mm with 19 parts on 18 nets, routed with 113 tracks and 152 vias.
It is built around the OKL-T/6-W12N-C, AMS1117-5.0 and SMAJ45CA. Its parts include 5 resistors, 5 connectors, 3 capacitors, 3 ICs and 2 diodes. It belongs with the robots and motor control boards of this library.
Main components
3OKL-T/6-W12N-C
SMD,12.2x12.2mm1 12.2mm 12.2mm 20mVp-p 300uF 30W 4.5V~14V 591mV~5.5V 600kHz 6A 7.2mm 93% Short Circuit Protection、Over Current Protection、Under Voltage Protection、Over-temperature protection、Automatic fault recovery、Power-on timing control SMD,12.2x12.2mm DC-DC Power Modules ROHSMurataIsolated Power ModulesAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSMAJ45CA
SMA(DO-214AC)-55℃~+150℃ 1uA 400W@10/1000us 45V 5.5A 50V 72.7V Bidirectional TVS SMA(DO-214AC) ESD and Surge Protection (TVS/ESD) ROHSDOWOESD And Surge Protection (TVS/ESD)
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x03 | Connector_Molex:Molex_SPOX_5268-03A_1x03_P2.50mm_Horizontal | J4, J5 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 2N3906 | Package_TO_SOT_SMD:SuperSOT-3 | Q1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J1 |
| 1 | SMAJ45CA | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | ~ | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U2 |
| 1 | ~ | Library:OKL | U3 |
Similar boards
- 2 layers95.5 × 50 mm

- 2 layers72 × 47 mm

- 2 layers70 × 76 mm

- 2 layers84 × 114 mm

- 2 layers95.9 × 83.8 mm

- 2 layers45.1 × 66 mm

- 2 layers70.6 × 100 mm

- 2 layers100 × 60 mm

Mother Ctrl
Tomoshibi-technology/RCJ-Japan2024-Circuit
RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発
253 parts1MIT
Questions
How big is the Catch25-servo PCB?
It measures 41.5 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Catch25-servo use?
19 parts, built around the OKL-T/6-W12N-C, AMS1117-5.0 and SMAJ45CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Catch25-servo KiCad files?
From the nn-lovers/FE-IP-01 repository on GitHub, at the commit this page was made from: the board is catch25-servo.kicad_pcb and its schematic catch25-servo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Catch25-servo design in my own project?
Its repository states no licence, so its author keeps all rights: ask nn-lovers before reusing the design.