Skip to the content
2 layers45.1 × 66 mmUSB power, the printed circuit board in 3D

30W級非絶縁型DCDC x2系統 USB-A/USB-C出力 12V→5V

Size
45.1 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
55
Pads
155
Tracks, vias
71, 72
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Jun 2024
Updated
30 Jun 2024

Overview

USB power is an open-source printed circuit board by NITIC-Robot-Club, from the NITIC-Robot-Club/NHK2024B_USB-Power repository on GitHub. It is a 2-layer board of 45.1 × 66 mm with 34 parts on 55 nets, routed with 71 tracks and 72 vias.

It is built around the OKL-T/6-W12N-C. Its parts include 14 resistors, 5 connectors, 4 capacitors, 2 diodes and 1 switch.

Main components

1

README

README.md

USB_Power

  • 12V入力 5V 6A出力 2系統
    • 系統1:
      • USB-A スタッキングコネクタ
    • 系統2:
      • USB-A スタッキングコネクタ
      • USB-C

Parts

34
QtyValueFootprintReferences
410kResistor_SMD:R_0805_2012MetricR11, R12, R13, R14
41kResistor_SMD:R_0805_2012MetricR1, R4, R6, R9
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
210RResistor_SMD:R_0805_2012MetricR3, R8
210uFCapacitor_SMD:C_0805_2012MetricC5, C10
2200RResistor_SMD:R_0805_2012MetricR5, R10
222uFCapacitor_SMD:C_0805_2012MetricC1, C2
2330RResistor_SMD:R_0805_2012MetricR2, R7
2LEDLED_SMD:LED_0603_1608MetricD1, D2
2OKL-T_6-W12N-CUSB_power:MURATA_OKL-T-6-W12N-C_0MD1, MD2
2USB_A_StackedConnector_USB:USB_A_CUI_UJ2-ADH-TH_Horizontal_StackedJ2, J5
110AFUSE_3557:FUSE_3557-2F1
1LOGOUSB_power:HALO_smallG***
1PWR_INConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ1
1Power_checkConnector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_VerticalJ3
1SwitchButton_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mmSW1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ4

Similar boards

  • 2 layers95.5 × 50 mmImu, the printed circuit board in 3D

    Imu

    komori-t/Tupac2018

    55 parts8
  • 2 layers72 × 47 mmPower Supply, the printed circuit board in 3D

    Power Supply

    KeioRoboticsAssociation/Power_Supply

    電源基板/配電盤

    24 parts4
  • 2 layers70 × 76 mmElec, the printed circuit board in 3D

    Elec

    elkel53930/daylight

    Manual RoboSweep Agent

    103 parts2
  • 2 layers84 × 114 mmElec, the printed circuit board in 3D

    Elec

    elkel53930/robosweep_twilight

    A robosweeper "Twilight"

    109 parts2MIT
  • 2 layers70.6 × 100 mmLogger v1, the printed circuit board in 3D

    Logger v1

    ntakao2006-web/RaceCapture

    123 parts1
  • 2 layers100 × 60 mmMother Ctrl, the printed circuit board in 3D

    Mother Ctrl

    Tomoshibi-technology/RCJ-Japan2024-Circuit

    RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発

    253 parts1MIT
  • 2 layers56 × 65 mmMainBoard V3 2, the printed circuit board in 3D

    MainBoard V3 2

    banbatakumi/AutonomousCar

    自律走行ミニカー SURGE Mark.2 の STM32 ファームウェアと基板(回路)。

    150 parts

Questions

How big is the USB power PCB?

It measures 45.1 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB power use?

34 parts, built around the OKL-T/6-W12N-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB power KiCad files?

From the NITIC-Robot-Club/NHK2024B_USB-Power repository on GitHub, at the commit this page was made from: the board is USB_power.kicad_pcb and its schematic USB_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB power design in my own project?

Its repository states no licence, so its author keeps all rights: ask NITIC-Robot-Club before reusing the design.