

Adafruit BMP390
- Size
- 25.4 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 12
- Pads
- 71
- Tracks, vias
- 178, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Sep 2025
- Updated
- 24 Sep 2025
Overview
Adafruit BMP390 is an open-source printed circuit board by njbizzle, from the njbizzle/RocketElectronics repository on GitHub. It is a 2-layer board of 25.4 × 17.8 mm with 25 parts on 12 nets, routed with 178 tracks and 17 vias.
It is built around the BMP388, AP2112K-3.3 and BSS138. Its parts include 4 resistors, 3 capacitors, 2 ICs, 2 diodes and 1 transistor.
Main components
3BMP388
LGA-10(2x2)-40℃~+85℃ 1.65V~3.6V 1pa/K 2uA 30Kpa~1.25bar 50pa 8pa I2C、SPI LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Adafruit BMP390:0603-NO | R1, R4, R5 |
| 2 | Adafruit BMP390:STEMMAQT | U$48, U$49 | |
| 2 | 10uF | Adafruit BMP390:0805-NO | C4, C5 |
| 2 | FIDUCIAL_1MM | Adafruit BMP390:FIDUCIAL_1MM | FID3, FID4 |
| 2 | MOUNTINGHOLE2.5 | Adafruit BMP390:MOUNTINGHOLE_2.5_PLATED | U$40, U$41 |
| 2 | STEMMA_I2C_QT | Adafruit BMP390:JST_SH4 | CONN3, CONN4 |
| 1 | Adafruit BMP390:PCBFEAT-REV-040 | U$47 | |
| 1 | Adafruit BMP390:ADAFRUIT_3.5MM | U$46 | |
| 1 | Adafruit BMP390:ADAFRUIT_2.5MM | U$2 | |
| 1 | Adafruit BMP390:1X08_ROUND_70 | JP1 | |
| 1 | Adafruit BMP390:SOLDERJUMPER_ARROW_NOPASTE | SJ1 | |
| 1 | 0.1uF | Adafruit BMP390:0603-NO | C6 |
| 1 | 10K | Adafruit BMP390:RESPACK_4X0603 | R2 |
| 1 | 1N4148 | Adafruit BMP390:SOD-323 | D2 |
| 1 | AP2112K-3.3 | Adafruit BMP390:SOT23-5 | U1 |
| 1 | BMP388 | Adafruit BMP390:BMP388 | IC1 |
| 1 | BSS138 | Adafruit BMP390:SOT363 | Q2 |
| 1 | GREEN | Adafruit BMP390:CHIPLED_0603_NOOUTLINE | D1 |
More from njbizzle/RocketElectronics
3- 2 layers25.4 × 17.8 mm

- 2 layers25.4 × 29.2 mm

- 16 layers31.8 × 25.4 mm

Similar boards
- 4 layers62.8 × 97.5 mm

- 2 layers137.5 × 51 mm

- 4 layers55 × 55 mm

- 6 layers50 × 50 mm

H743-fc
DataFlux-Robot/fluxpcb
全自动AI电路设计流水线: 需求→选型→原理图→PCB→验收仿真→固件,六环节门禁闭环 | Six-stage automated circuit design pipeline with machine-checkable verification gates
33 parts1Apache-2.0 - 4 layers33 × 20 mm

- 6 layers40.6 × 40.5 mm

Flight Controller
desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.
169 partsCERN-OHL-S-2.0 - 2 layers79.8 × 66.8 mm

- 4 layers36 × 36 mm

SATVIK-26
SavvySatvikCodes/SATVIK-26
Stabilized Autonomous Telemetry Vehicle Intelligent Kopter | Autonomous drone from scratch for delivery/filming
80 parts
Questions
How big is the Adafruit BMP390 PCB?
It measures 25.4 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adafruit BMP390 use?
25 parts, built around the BMP388, AP2112K-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adafruit BMP390 KiCad files?
From the njbizzle/RocketElectronics repository on GitHub, at the commit this page was made from: the board is kicad_pbc/RocketElectrionics/lib/_my_lib/AdafruitProjectDest/Adafruit-BMP390/Adafruit BMP390.kicad_pcb and its schematic kicad_pbc/RocketElectrionics/RocketElectrionics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adafruit BMP390 design in my own project?
Its repository states no licence, so its author keeps all rights: ask njbizzle before reusing the design.