
RAM R2
nimishcoder1232/TVC-Rocket
This is the repo for my TVC rocket that took two years to develop.

This repo has everything that I made for my rocket that can propulsive landing, while still being under ITAR restrictions.
RAM R2 is an open-source printed circuit board by nimishcoder1232, from the nimishcoder1232/Bedroom-Engineering-Propulsive-Landing-Project repository on GitHub. It is a 4-layer board of 45 × 81 mm with 78 parts on 90 nets, routed with 912 tracks and 102 vias.
It is built around the ESP32-S3-WROOM-1-N8, BMP390L and CP2102N-A02-GQFN28, with the TPS565208DDC, W25Q16JVSSIQ and BMI270 among its other parts. Its parts include 21 capacitors, 17 resistors, 11 connectors, 7 ICs and 7 diodes. It belongs with the ESP32 boards of this library.
This repo has everything that I made for my rocket that can propulsive landing, while still being under ITAR restrictions.
For this project, I will design a rocket that can launch and then do a propulsive landing. In order to meet this challenge, I will have to make a new custom ESP32-based flight computer. I will have to make a quaternion orientation calculation system, I will have to design a control loop, and I will have to make a simulator in Python, without vibe coding, because it is too complicated. The simulator will simulate the rocket’s flight to help tune the control loop and the propulsive landing.
I did this project for a few reasons. The first reason I did it, is because in gneral, this is my passion. I love both engineering and rockets, so this is satisfactory for me. This isant a project for me, this project is more, who I am. I also made this project to learn from it. Throughout this project, I have learned sooo much, PCB design, CAD, Programign in many languages, soldering. And SO much more. Every time I sit down to do one of these projects, I end up learning so much. That is the second reason I work on these projects, To learn From them.
Notes: I am 3d printing everything myself, I DONT need reinbursment
The cad has all the parts. The engine, and the dc motor, and the syringes, are provided by me.
The cad is ONE zip file. Once you unpack it, it has ALL the parts. the file in ALL CAPS called FULL ASEMBLY is the completed asembbly.
No explosives are in any of the BOM, no engines, nothing.
Project Link: https://blueprint.hackclub.com/projects/7459
Full Rocket:
PCB schematic:
PCB Routing:
PCB Preview:
Wiring Diagram:
Any bold line is a electrical wire. I have color coded it. black for ground, red for power, and blue for saignals. if two same color lines touch, thats a connection, if two ddifferent colored lines overlaped, thats NOT a connection.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1 uf | Capacitor_SMD:C_0805_2012Metric | C10, C11, C13, C14, C16 |
| 5 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C5, C12, C17, C18, C19 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1, J2, J3, J4, J5 |
| 4 | 10 K | Resistor_SMD:R_0805_2012Metric | R8, R15, R16, R17 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R5, R6, R7 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7, J8 |
| 3 | D | Diode_SMD:D_SMA | D4, D5, D6 |
| 3 | LESD5D5.0CT1G | Diode_SMD:TVS_LESD5D5.0CT1G | D1, D2, D3 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C7, C20 |
| 2 | 10 uf | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 1uf | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 22 uF | Capacitor_SMD:C_0805_2012Metric | C22, C23 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R18, R19 |
| 2 | L8050QLT1G | Package_TO_SOT_SMD:SOT-23 | T1, T2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 22 uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 22.1 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 350 omh | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 47.5K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 60 omh | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | BMI270 | Sensor_Motion:XDCR_BMI270 | U4 |
| 1 | BMP390L | Sensor_Pressure:XDCR_BMP390L | U6 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | CP2102N-A02-GQFN28 | Connector_USB:QFN50P500X500X80-29N | U1 |
| 1 | Conn_01x06 | Connector:6pad genaric | J11 |
| 1 | Conn_01x10 | Connector:10 pad genaric | J9 |
| 1 | ESP32-S3-WROOM-1-N8 | Sensor:XCVR_ESP32-S3-WROOM-1-N8 | U2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | TPS565208 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J12 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
The 74 most common of 78 parts.

nimishcoder1232/TVC-Rocket
This is the repo for my TVC rocket that took two years to develop.

uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip



InSynchronous/mango
An ESP32-S3 based flight computer with an external flash, imu, barometer, magnetometer, 4 servo ports, and 4 pyrotechnic channels with MOSFETs. Designed for Aerospace applications.

InSynchronous/UltraHawk
A custom flight computer designed for drones and flight computers.

FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard
Contient tout les fichier KiCad nécessaire pour faire une carte ESP32S3 avec un module Wroom-1.

It measures 45 × 81 mm and has 4 copper layers, 1.6 mm thick.
78 parts, built around the ESP32-S3-WROOM-1-N8, BMP390L, CP2102N-A02-GQFN28 and TPS565208DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nimishcoder1232/Bedroom-Engineering-Propulsive-Landing-Project repository on GitHub, at the commit this page was made from: the board is pcb/RAM R2.kicad_pcb and its schematic pcb/RAM R2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nimishcoder1232 before reusing the design.