

ESP32 S3 devkit test
Contient tout les fichier KiCad nécessaire pour faire une carte ESP32S3 avec un module Wroom-1.
- Size
- 36.6 × 57.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 72
- Pads
- 270
- Tracks, vias
- 674, 112
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Mar 2025
- Updated
- 26 Mar 2025
Overview
ESP32 S3 devkit test is an open-source printed circuit board by FrWA14, from the FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard repository on GitHub. It is a 2-layer board of 36.6 × 57.1 mm with 44 parts on 72 nets, routed with 674 tracks and 112 vias.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and LESD5D5.0CT1G, with the 1N5819HW-7-F-01, L8050QLT1G and TS-1088-AR02016 among its other parts. Its parts include 12 resistors, 11 capacitors, 10 diodes, 4 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedL8050QLT1G
SOT-23-55℃~+150℃ 1 NPN 100 150nA 225mW 25V 500mV 5V 800mA NPN SOT-23 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdContient tout le projet KiCad afin de faire une carte de développement ESP32 :
-Schématique -PCB -BOM et référence JLCPCB
/!\ Il faudra faire la rotation de certains composants lors de la production chez JLCPCB.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523_LESD5D5.0CT1G | D1, D2, D3, D5, D6, D7 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C6 |
| 5 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R11 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R12, R13, R17 |
| 2 | 1N5819HW-7-F | Diode_SMD:D_SOD-123_1N5819HW-7-F | D4, D8 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C11 |
| 2 | Conn_01x22 | Connector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_Vertical | J3, J4 |
| 2 | L8050QLT1G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | TS-1088-AR02016 | Button_Switch_SMD:SW_TS-1088-AR02016 | S1, S2 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1, J2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D10 |
Similar boards
- 2 layers

- 4 layers115 × 55 mm

Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 2 layers30 × 63 mm

- 4 layers93 × 72 mm

- 2 layers61 × 35 mm

Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1 - 2 layers49.2 × 73.5 mm

- 2 layers86 × 54 mm

- 4 layers45 × 81 mm

RAM R2
nimishcoder1232/Bedroom-Engineering-Propulsive-Landing-Project
This repo has everything that I made for my rocket that can propulsive landing, while still being under ITAR restrictions.
78 parts
Questions
How big is the ESP32 S3 devkit test PCB?
It measures 36.6 × 57.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 S3 devkit test use?
44 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3, LESD5D5.0CT1G and 1N5819HW-7-F-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 S3 devkit test KiCad files?
From the FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard repository on GitHub, at the commit this page was made from: the board is ESP32_S3_devkit_test/ESP32_S3_devkit_test.kicad_pcb and its schematic ESP32_S3_devkit_test/ESP32_S3_devkit_test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 S3 devkit test design in my own project?
Its repository states no licence, so its author keeps all rights: ask FrWA14 before reusing the design.