2 layers36.6 × 57.1 mm
ESP32 S3 devkit test
FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard
Contient tout les fichier KiCad nécessaire pour faire une carte ESP32S3 avec un module Wroom-1.
44 parts1
2 layers49.2 × 73.5 mm
LEDStrip
GarethCooke/ArduinoArduino and ESP8266 / ESP32 projects
- Size
- 49.2 × 73.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 75
- Pads
- 286
- Tracks, vias
- 844, 69
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Apr 2022
- Updated
- 18 Aug 2026
Overview
LEDStrip is an open-source printed circuit board by GarethCooke, from the GarethCooke/Arduino repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 49.2 × 73.5 mm with 72 parts on 75 nets, routed with 844 tracks and 69 vias.
It is built around the ESP32-S3-WROOM-1-N8, LM2596S-5.0 and AMS1117-3.3, with the IRFML8244TR, LESD5D5.0CT1G and 1N5819HW-7-F-01 among its other parts. Its parts include 19 capacitors, 15 resistors, 7 connectors, 6 diodes and 5 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
8
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRFML8244TR
SOT23-325V 5.8A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes Incorporated
CMA-4544PF-W
--44dB@±2dB 2.2kΩ 3V~10V 4.65mm 500uA 60dB 9.7mm Omnidirectional 插件,D=9.7mm Microphones ROHSCUIBuzzers
SK32
SMB-55℃~+150℃ 1 Independent 20V 3A 500uA@20V 550mV@3A 80A SMB Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdArduino
Arduino, ESP8266, and ESP32 projects.
Standalone projects
Complete systems with their own repos, docs, and release history:
| Project | Description | Docs |
|---|---|---|
| MorayGlow | WiFi RGB LED strip controller — XIAO ESP32-S3, custom PCB, MQTT/REST/WebSocket, Home Assistant | garethcooke.github.io/MorayGlow |
| WhisperBridge | WiFi/MQTT-to-BLE bridge for Vent-Axia Svara fan, Home Assistant integration, no cloud required | garethcooke.github.io/WhisperBridge |
Experiments and prototypes
Smaller, exploratory projects that live here:
- BeatReceiveTest / BeatReceiveWifi — beat detection and WiFi sync experiments
- EqualiserTest — audio equaliser prototype
- LEDStrip — early LED strip work (preceded MorayGlow)
- VentAxia — Vent-Axia fan analysis (preceded WhisperBridge)
Common libraries
Shared code used across projects lives in Common/:
- IguanaLib — core utilities
- IguanaFont — font rendering helpers
- IguanaBeat — beat detection library
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C10, C11, C12, C13, C14 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C6 |
| 4 | Hole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R7, R8 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric | R10, R11, R15 |
| 3 | IRFML8244 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2, D4, D5 |
| 2 | 330uF | Capacitor_Tantalum_SMD:CP_EIA-7360-38_Kemet-E | CIN1, CIN2 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 0.1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C18 |
| 1 | 0.47uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C17 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C19 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 2.2uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C16 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | COUT1 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 22nF - 1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C15 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 3uH | Inductor_SMD:L_Coilcraft_XAL7070-XXX | L1 |
| 1 | 56 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ATT : REL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | Barrel Jack | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J5 |
| 1 | CMA-4544PF-W | CMA-4544PF-W:MIC_CMA-4544PF-W | MK1 |
| 1 | CMD BTN | IguanaLibrary:SW_RGB_JST_SH | SW3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | GAIN | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | LED ADDR | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J3 |
| 1 | LED MATRIX | Connector_JST:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J4 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | LOGO | IguanaWare:Iguana | G*** |
| 1 | LOGO | IguanaWare:IguanaWare | |
| 1 | MAX9814 | Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm | U6 |
| 1 | MSGEQ7 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | RGB LED | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | SK32 | Diode_SMD:D_SMA | D3 |
| 1 | SSD1306 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | TFT | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | TFT BKL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | USB C | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
Similar boards
- 2 layers61 × 35 mm
Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1 - 4 layers110 × 160 mm
- 2 layers
- 4 layers115 × 55 mm
Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 2 layers108 × 60.9 mm
MotionBoy
CaseyRasor/custom_esp32_screen_header
Custom ESP32 PCB with screen header for 4" tft display and gpio headers
57 parts - 4 layers49.8 × 67.3 mm
- 2 layers30 × 63 mm
Questions
How big is the LEDStrip PCB?
It measures 49.2 × 73.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDStrip use?
72 parts, built around the ESP32-S3-WROOM-1-N8, LM2596S-5.0, AMS1117-3.3 and IRFML8244TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDStrip KiCad files?
From the GarethCooke/Arduino repository on GitHub, at the commit this page was made from: the board is Projects/LEDStrip/PCB/KiCad/LEDStrip.kicad_pcb and its schematic Projects/LEDStrip/PCB/KiCad/LEDStrip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDStrip design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).