2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0
2 layers
Wind sensor
nilnil47/wind_sensorangle 7 click datasheet - https://www.mikroe.com/angle-7-click angle 7 click schematic - https://download.mikroe.com/documents/add-on-boards/click/angle7click/Angle7clickv101Schematic.PDF
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 22
- Pads
- 46
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Aug 2023
- Updated
- 19 Aug 2023
Overview
Wind sensor is an open-source printed circuit board by nilnil47, from the nilnil47/wind_sensor repository on GitHub. It is a 2-layer board with 11 parts on 22 nets.
Its parts include 5 resistors, 2 capacitors, 2 connectors and 1 IC. It belongs with the sensors and measurement boards of this library.
README
README.mduseful links
angle 7 click datasheet - https://www.mikroe.com/angle-7-click angle 7 click schematic - https://download.mikroe.com/documents/add-on-boards/click/angle_7_click/Angle_7_click_v101_Schematic.PDF
AS5600 (the main componnet) datasheet - https://www.snapeda.com/parts/AS5600/Ams%20AG/datasheet/
AS5600 footprint and schematic can be downloaded from ultralibrarian
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2, R3 |
| 2 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 0 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R6 |
| 1 | 0.1uF | Capacitor_SMD:CP_Elec_6.3x3 | C2 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_6.3x3 | C1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | AS5600 | AS5600:AS5600L-ASOM_AMS | U1 |
| 1 | LED | LED_SMD:LED-APA102-2020 | LD1 |
| 1 | OPT | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
Questions
What parts does the Wind sensor use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wind sensor KiCad files?
From the nilnil47/wind_sensor repository on GitHub, at the commit this page was made from: the board is wind_sensor.kicad_pcb and its schematic wind_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wind sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask nilnil47 before reusing the design.
Similar boards
- 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0