2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0
2 layers
Fet module
ByteWelder/Decktility855A handheld PC
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 9
- Pads
- 24
- Tracks, vias
- 18, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 May 2023
- Updated
- 24 May 2023
Overview
Fet module is an open-source printed circuit board by ByteWelder, from the ByteWelder/Decktility repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board with 11 parts on 9 nets, routed with 18 tracks and 2 vias.
Its parts include 3 resistors, 1 IC, 1 diode and 1 transistor.
README
fet-module/README.mdThis is the KiCad project for the FET board, which acts as an electronic switch to turn on/off the hardware depending on available battery power.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | +5VD, GNDD, GNDPWR, Vin, Vout |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | PMOS | Package_TO_SOT_SMD:TO-263-2 | Q1 |
Questions
What parts does the Fet module use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fet module KiCad files?
From the ByteWelder/Decktility repository on GitHub, at the commit this page was made from: the board is fet-module/fet-module.kicad_pcb and its schematic fet-module/fet-module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fet module design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0 - 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0