2 layers30.5 × 17.8 mm
Isolator
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0
2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking743Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
- Size
- 42.5 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 18
- Pads
- 62
- Tracks, vias
- 156, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Nov 2017
- Updated
- 28 Nov 2024
Overview
Devboard is an open-source printed circuit board by basilfx, from the basilfx/TRADFRI-Hacking repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 42.5 × 36.8 mm with 11 parts on 18 nets, routed with 156 tracks and 1 via.
Its parts include 5 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode. It belongs with the microcontroller boards and radio and wireless boards of this library.
README
contrib/pcbs/isolator/README.mdIsolator
Tiny board to isolate UART RX/TX from target board.
Pictures
Board
Schema
You can find the schema here.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10µF | Capacitor_SMD:CP_Elec_3x5.3 | C1 |
| 1 | ARM-JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Left | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Right | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | TRADFRI | IKEA:TRADFRI_PCB2.0 | U1 |
Questions
How big is the Devboard PCB?
It measures 42.5 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Devboard use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Devboard KiCad files?
From the basilfx/TRADFRI-Hacking repository on GitHub, at the commit this page was made from: the board is contrib/pcbs/devboard/Devboard.kicad_pcb and its schematic contrib/pcbs/devboard/Devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Devboard design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from basilfx/TRADFRI-Hacking
1Similar boards
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0