2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0
2 layers30.5 × 17.8 mm
Isolator
basilfx/TRADFRI-Hacking743Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
- Size
- 30.5 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 14
- Pads
- 36
- Tracks, vias
- 46, 2
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Nov 2017
- Updated
- 28 Nov 2024
Overview
Isolator is an open-source printed circuit board by basilfx, from the basilfx/TRADFRI-Hacking repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 30.5 × 17.8 mm with 11 parts on 14 nets, routed with 46 tracks and 2 vias.
It is built around the FOD8012A. Its parts include 4 connectors, 2 capacitors, 2 resistors, 2 diodes and 1 IC. It belongs with the radio and wireless and lEDs and displays boards of this library.
Main components
1README
contrib/pcbs/isolator/README.mdIsolator
Tiny board to isolate UART RX/TX from target board.
Pictures
Board
Schema
You can find the schema here.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J4 |
| 1 | FOD8012 | SMD_Packages:SOIC-8-N | U1 |
| 1 | UART-to-Device | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | USB-to-UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
Questions
How big is the Isolator PCB?
It measures 30.5 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Isolator use?
11 parts, built around the FOD8012A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Isolator KiCad files?
From the basilfx/TRADFRI-Hacking repository on GitHub, at the commit this page was made from: the board is contrib/pcbs/isolator/Isolator.kicad_pcb and its schematic contrib/pcbs/devboard/Devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Isolator design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from basilfx/TRADFRI-Hacking
1Similar boards
- 2 layers32.2 × 15.3 mm
- 2 layers
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
