

- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 82
- Pads
- 275
- Tracks, vias
- 722, 53
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Oct 2020
- Updated
- 7 Oct 2024
Overview
Poc is an open-source printed circuit board by nikital, from the nikital/keyboard repository on GitHub. It is a 2-layer board of 100 × 100 mm with 63 parts on 82 nets, routed with 722 tracks and 53 vias.
It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 15 resistors, 14 diodes, 11 switches, 10 capacitors and 9 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | D_Small | Diode_SMD:D_SOD-123 | D2, D6, D7, D8, D9, D11, D12, D13, D14 |
| 8 | SW_Push_45deg | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R8, R9, R10, R14, R15 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C8, C9, C10 |
| 3 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1, D3, D5 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R13 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D10 |
| 2 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW10, SW11 |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | CP | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J9 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J6 |
| 1 | Left | local_footprint:RJ12_Custom1 | J3 |
| 1 | MCP23018_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | Right | local_footprint:RJ12_Custom1 | J2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | USB_B_Mini | local_footprint:USB_Mini-B_Custom1_Horizontal | J1 |
More from nikital/keyboard
4- 2 layers218 × 127 mm

- 2 layers

- 2 layers

- 2 layers141.8 × 127 mm

Similar boards
- 2 layers243.9 × 136.5 mm

Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers217.7 × 91.1 mm

- 2 layers298.8 × 122 mm

Ursaminor pcb
markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard
225 parts23 - 2 layers285.5 × 112.1 mm

- 2 layers242.3 × 75.4 mm

- 2 layers333.4 × 88.6 mm

Reverie
makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards
140 parts14 - 2 layers281.8 × 166.9 mm

Micro redox semi split
makenova/micro_redox
A family of boards inspired by the microdox and ferris
96 parts13 - 2 layers276.2 × 79.8 mm

Questions
How big is the Poc PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Poc use?
63 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Poc KiCad files?
From the nikital/keyboard repository on GitHub, at the commit this page was made from: the board is pcb/poc/poc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Poc design in my own project?
Its repository states no licence, so its author keeps all rights: ask nikital before reusing the design.