
Poe backplate
dotstartech/wall-panel
Wall mounted 4 inch touch display panel with CM4 inside

A PoE+ powered addressable LED strip driver using an ESP32-C6.
Whylight is an open-source printed circuit board by Nicolai-Electronics, from the Nicolai-Electronics/poe-ledstrip-controller-hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 107.9 × 40 mm with 113 parts on 106 nets, routed with 947 tracks and 193 vias.
It is built around the 74LVC1G125, ESP32-C6-WROOM-1-N8 and GM3085N, with the RA-01SH, AP63203WU and AG5405 among its other parts. Its parts include 36 resistors, 33 capacitors, 12 ICs, 11 diodes and 7 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Hardware design files for the WHYlight project.
A PoE+ powered addressable LED strip driver using an ESP32-C6.
Copyright 2024 Nicolai Electronics
This project is licensed CERN-OHL-P.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C5, C13, C18, C19, C21, C23, C24, C25, C26, C27, C28, C29, C32, C33 |
| 8 | SS36 | Diode_SMD:D_SMA | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R7, R10, R12, R16 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R13, R14, R23 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R18, R19, R22, R24 |
| 4 | ~ | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 10 | Resistor_SMD:R_0402_1005Metric | R25, R31, R32 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C11, C12, C14 |
| 3 | 470u | Capacitor_SMD:CP_Elec_8x10 | C9, C20, C22 |
| 3 | 51k | Resistor_SMD:R_0402_1005Metric | R11, R28, R36 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R27, R29 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C10, C16 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | 1n | Capacitor_SMD:C_1206_3216Metric | C6, C7 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R33, R34 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 5.5v | Diode_SMD:D_SOD-323 | D10, D11 |
| 2 | 6.8n | Capacitor_SMD:C_0402_1005Metric | C30, C31 |
| 2 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U8, U9 |
| 2 | DNP | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 0826-1X1T-GJ-F | library:BEL_0826-1X1T-GJ-F | J6 |
| 1 | 10m | Resistor_SMD:R_1206_3216Metric | R30 |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 120 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2A | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 3.9u | Inductor_SMD:L_Coilcraft_XAL5050-XXX | L1 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 68n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | AG5405 | library:AG5300 | U1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U6 |
| 1 | ESP32-C6-WROOM-1 | microcontrollers:ESP32-C6-WROOM-1 | U3 |
| 1 | External 5v | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | External 5v | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | GM3085N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | I2C | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J4 |
| 1 | INA233 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U10 |
| 1 | KPC357NT0ATLD | library:SOP-4_L3.9-W4.4-P2.54-LS7.0-BR | U2 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U11 |
| 1 | LDO_B | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | LDO_E | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | LED logic | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | LED power bypass | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | Ledstrip | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_4-GF-5.08_1x04_P5.08mm_Horizontal_ThreadedFlange_MountHole | J7 |
| 1 | Logo | library:logo_nicolai | N1 |
| 1 | Power source | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | Ra-01SH | RF_Module:Ai-Thinker-Ra-01-LoRa | U4 |
| 1 | SMAJ58 | Diode_SMD:D_SMA | D9 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | USB device | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U7 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |

dotstartech/wall-panel
Wall mounted 4 inch touch display panel with CM4 inside




ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.

badgeteam/hackerhotel-2024-hardware
Conference badge for Hackerhotel 2024


enkhbold470/iron-node
ESP32-S3 industrial gateway: W5500 Ethernet, isolated RS-485 (ADM2587E), CAN, 9-36 V input. 4-layer KiCad 10 board.
It measures 107.9 × 40 mm and has 4 copper layers, 1.6 mm thick.
113 parts, built around the 74LVC1G125, ESP32-C6-WROOM-1-N8, GM3085N and RA-01SH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nicolai-Electronics/poe-ledstrip-controller-hardware repository on GitHub, at the commit this page was made from: the board is whylight.kicad_pcb and its schematic ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).