2 layers121.3 × 99.9 mm
Capacitor bank
nick1076/Coil-Gun
Repo for all circuitry, research, files, and code for the coil gun project.
13 parts
2 layers50.8 × 35.1 mm
Circuit board
nick1076/Coil-GunRepo for all circuitry, research, files, and code for the coil gun project.
- Size
- 50.8 × 35.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 20
- Pads
- 42
- Tracks, vias
- 80, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 May 2024
- Updated
- 22 Nov 2024
Overview
Circuit board is an open-source printed circuit board by nick1076, from the nick1076/Coil-Gun repository on GitHub. It is a 2-layer board of 50.8 × 35.1 mm with 14 parts on 20 nets, routed with 80 tracks and 0 vias.
It is built around the ATTINY1614-SSN, L7805 and IRLZ44N. Its parts include 4 resistors, 2 ICs, 1 capacitor, 1 diode and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY1614-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 0Ω | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 100µF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 100Ω | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 10Ω | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1kΩ | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 2x3 Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ATtiny1614 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
More from nick1076/Coil-Gun
2- 2 layers38.7 × 59.7 mm
Legacy
nick1076/Coil-Gun
Repo for all circuitry, research, files, and code for the coil gun project.
7 parts
Similar boards
- 2 layers100 × 100 mm
- 2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers80.3 × 79.2 mm
PWM Multiplexer
ambadran/PCB-Manufacturer
A CNC machine with a kinematic mounting mechanism and customized GRBL Firmware to allow automated end-effector change; Allowing access to all the tools needed to create a PCB without human intervention.
71 parts2 - 2 layers
- 2 layers90 × 40 mm
Plate
BryceVandegrift/hot-plate
A DIY PCB hot plate that uses through hole components
30 parts1CERN-OHL-W-2.0 - 2 layers51.5 × 42 mm
SolarBasedRealTimeGreenHouseAutomation
prashantbhandary/SolarBasedRealTimeGreenHouseAutomation
13 parts1 - 2 layers100 × 100 mm
- 4 layers50 × 50 mm
Dryer control
souptik-samanta/dryer
A custom PCB and self-centering spool holder for drying 3D printer filament. The PCB controls the fans, monitors temperature, and provides connections for PTC heaters.
33 parts1
Questions
How big is the Circuit board PCB?
It measures 50.8 × 35.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Circuit board use?
14 parts, built around the ATTINY1614-SSN, L7805 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Circuit board KiCad files?
From the nick1076/Coil-Gun repository on GitHub, at the commit this page was made from: the board is mk2/mk2 finished files/pcb/circuit_board/circuit_board.kicad_pcb and its schematic mk2/legacy/capacitor bank (OLD)/capacitor bank.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Circuit board design in my own project?
Its repository states no licence, so its author keeps all rights: ask nick1076 before reusing the design.