Skip to the content
2 layers107.3 × 127 mmOctessera, the printed circuit board in 3D

Octessera turns cellular automata into music you can play.

Size
107.3 × 127 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
49
Pads
144
Tracks, vias
217, 8
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 Apr 2026
Updated
7 Nov 2026

Overview

Octessera is an open-source printed circuit board by nexxyz, from the nexxyz/octessera repository on GitHub. It is a 2-layer board of 107.3 × 127 mm with 12 parts on 49 nets, routed with 217 tracks and 8 vias.

It is built around the PCM5102APW and SA5.0A. Its parts include 5 ICs, 4 switches, 1 capacitor, 1 diode and 1 connector.

Main components

2

README

README.md

Octessera

Octessera turns cellular automata into music you can play.

It is a collection of small algorithmic musical world-bubbles. Set up a few systems, combine them, nudge them, anchor them with a little sequencing, and perform with the result in real time. The little rule-based worlds surprise you, and you decide which surprises to keep.

Start here

The standalone instrument is built on exactly one of those two boards, with an 8x8 light-up grid, four keys, encoders, an OLED, and a DAC. The desktop simulator mirrors the same instrument, so you can explore it on a computer before you warm up the soldering iron.

What you can make

  • Grow generative synth patterns from Life, Brain, Ant, Bounce, Raindrops, and other cellular-automata behaviors.
  • Make hands-on drum sequences, load samples, and send parts to external MIDI gear.
  • Layer up to eight instruments and let grid motion reshape another layer's pitch, filter, velocity, or probability through modulation.
  • Route instruments directly or through FX buses, then shape the shared mix with bus and global effects.
  • Use Keys to play a line live, and use Play pages to mix, pan, change trigger probability, move XY controls, and punch in momentary effects.

A first session might be a drifting life pattern under a hand-built drum sequence, with a sampler providing the hits, a bus effect making room for the synth, and a live Keys layer nudging the whole thing somewhere new.

Two reading guides

  • User guide: the simulator, building and setting up the hardware, making music, controls, and reference pages. Start here if you want to play or build one.
  • Technical guide: architecture, contracts, the two fixed board paths, build and deployment tools, and provenance. Start here if you want to change the code.

Notes

License · Sample pack · Hardware attributions · Third-party notices

This project was created with AI assistance. Octessera itself, however, does not contain any AI.

Parts

12
QtyValueFootprintReferences
4RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW1, SW2, SW3, SW4
1470ufCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1
1NeoKeyadafruit-modules:Adafruit_NeoKey_1x4_QTU5
1NeoTrellis_Connadafruit-modules:Adafruit_NeoTrellis_Connector_1x5J1
1PCM5102aadafruit-modules:Adafruit_PCM510x_I2S_DAC_6250U4
1Raspberry Zero 2 WRASPBERRY_PI_ZERO_2_W:MODULE_RASPBERRY_PI_ZERO_2_WU1
1SA5.0ADiode_THT:D_DO-15_P10.16mm_HorizontalD1
1SSD1351adafruit-modules:Adafruit_SSD1351_OLEDU2
1USB-Cadafruit-modules:Adafruit_USB_C_BreakoutU3

Similar boards

  • 4 layers290 × 215 mmPlacard, the printed circuit board in 3D

    Placard

    tocksin/placard

    PLA computer

    187 parts2AGPL-3.0
  • 4 layers100 × 79 mmESP32 Interface, the printed circuit board in 3D

    ESP32 Interface

    dennowiggle/ESP32_Interface

    Facilitate learning the Z80 Retro! hardware and software.

    114 parts1LGPL-2.1
  • 2 layers97.6 × 107.1 mmDriver, the printed circuit board in 3D

    Driver

    AlistairCheeseman/WindTunnelApparatus

    MENG Data Acquisition + motion control for Wind Tunnel Apparatus

    37 partsGPL-3.0
  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 2 layers54 × 60.5 mmTape, the printed circuit board in 3D

    Tape

    jrowny/mixtape2

    My second iteration of a cassette-style mp3 player

    38 parts82MIT
  • 2 layers140 × 170 mmCdi, the printed circuit board in 3D

    Cdi

    ThroatyMumbo/NESCD

    An unofficial CD drive add-on for the NES.

    28 parts78MIT
  • 2 layers232 × 134 mmType2 v2, the printed circuit board in 3D

    Type2 v2

    Alxdreee/TYPE-2

    Touch-capacitive polyphonic synthesizer powered by ESP32-S3

    18 parts68GPL-3.0
  • 2 layers55 × 100 mmESP32AY revD2, the printed circuit board in 3D

    ESP32AY revD2

    djspawnbrest/ESP32AY

    ZxPod - ESP32 based AY multiformat player

    138 parts59GPL-3.0

Questions

How big is the Octessera PCB?

It measures 107.3 × 127 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Octessera use?

12 parts, built around the PCM5102APW and SA5.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Octessera KiCad files?

From the nexxyz/octessera repository on GitHub, at the commit this page was made from: the board is hardware/pcb/octessera.kicad_pcb and its schematic hardware/pcb/octessera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Octessera design in my own project?

Its repository states no licence, so its author keeps all rights: ask nexxyz before reusing the design.