Skip to the content
12

SA5.0A

LittelfuseExtended

500W@10/1000us 55.4A@10/1000us 5V 600uA 7V 9.2V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-204AC(DO-15) ESD and Surge Protection (TVS/ESD) ROHS

Part id
littelfuse/SA5.0A
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-204AC(DO-15)
Pins
2
In stock
20 at JLCPCB (C151234)
Used on
4 open-source boards

Overview

The SA5.0A is an ESD And Surge Protection made by Littelfuse in a DO-204AC(DO-15) package with 2 pins. 500W@10/1000us 55.4A@10/1000us 5V 600uA 7V 9.2V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-204AC(DO-15) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (EasyEDA_Cloud:DO-15_BD3.1-L6.7-P10.70-D0.9-RD, from EasyEDA), ready for a KiCad board. 20 are in stock at JLCPCB (part C151234). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
EasyEDA_Cloud:DO-15_BD3.1-L6.7-P10.70-D0.9-RDFrom EasyEDA

Pinout

2
The pins of the SA5.0A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

4
  • 4 layers290 × 215 mmPlacard, the printed circuit board in 3D

    Placard

    tocksin/placard

    PLA computer

    187 parts2AGPL-3.0
  • 4 layers100 × 79 mmESP32 Interface, the printed circuit board in 3D

    ESP32 Interface

    dennowiggle/ESP32_Interface

    Facilitate learning the Z80 Retro! hardware and software.

    114 parts1LGPL-2.1
  • 2 layers107.3 × 127 mmOctessera, the printed circuit board in 3D

    Octessera

    nexxyz/octessera

    Octessera turns cellular automata into music you can play.

    12 parts
  • 2 layers97.6 × 107.1 mmDriver, the printed circuit board in 3D

    Driver

    AlistairCheeseman/WindTunnelApparatus

    MENG Data Acquisition + motion control for Wind Tunnel Apparatus

    37 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SA5.0A?

Yes. The symbol is Device:D_TVS and the footprint EasyEDA_Cloud:DO-15_BD3.1-L6.7-P10.70-D0.9-RD, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SA5.0A?

DO-204AC(DO-15), with 2 pins. Its footprint is drawn on this page.

Where is the SA5.0A datasheet?

Littelfuse publishes it: the Datasheet link on this page opens it.

Where can I order the SA5.0A?

JLCPCB lists it as part C151234, with 20 in stock; the sellers' links on this page open their listings.

What can replace the SA5.0A?

Parts like it in the library: the SA5.0A/B by Brightking, the SAC5.0/B by Brightking, the SA5.0A-B by Littelfuse and the SA5.0CA by SUNMATE Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SA5.0A?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.