2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers97.7 × 93 mm
LightStar RevA
newlifebc/LightStarLightStar PCB and Firmware for 2019 Christmas Show
- Size
- 97.7 × 93 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 9
- Pads
- 54
- Tracks, vias
- 217, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Dec 2019
- Updated
- 22 Dec 2019
Overview
LightStar RevA is an open-source printed circuit board by newlifebc, from the newlifebc/LightStar repository on GitHub, published under the MIT licence. It is a 2-layer board of 97.7 × 93 mm with 18 parts on 9 nets, routed with 217 tracks and 9 vias.
It is built around the ATTINY85-20SU. Its parts include 6 diodes, 3 capacitors, 3 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdLightStar
LightStar PCB and Firmware for 2019 Christmas Show
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED | LED_THT:LED_D5.0mm | D101, D102, D103, D104, D105, D106 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C101, C103 |
| 2 | 47K | Resistor_SMD:R_0805_2012Metric | R101, R103 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R102 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C102 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U101 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT101 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J101 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP101 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW101 |
| 1 | VS18388 | MyFootprints:VS1838B | U102 |
Questions
How big is the LightStar RevA PCB?
It measures 97.7 × 93 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightStar RevA use?
18 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightStar RevA KiCad files?
From the newlifebc/LightStar repository on GitHub, at the commit this page was made from: the board is hardware/LightStar_RevA/LightStar_RevA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightStar RevA design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28