

Ir switcher
DIY projects
- Size
- 40.6 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 17
- Pads
- 45
- Tracks, vias
- 54, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 3 Sep 2015
- Updated
- 3 Apr 2025
Overview
Ir switcher is an open-source printed circuit board by nenadalm, from the nenadalm/diy repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.6 × 43.2 mm with 11 parts on 17 nets, routed with 54 tracks and 0 vias.
It is built around the BC237. Its parts include 4 resistors, 2 ICs, 2 transistors and 1 connector.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100R | Discret:R3 | R3, R4 |
| 2 | 470R | Discret:R3 | R1, R2 |
| 2 | BC237 | Housings_TO-92:TO-92-Bipolar-inline-wide-CBE | Q1, Q2 |
| 2 | opto_relay_8 | Sockets_DIP:DIP-8__300 | U1, U2 |
| 1 | CONN_2 | Pin_Headers:Pin_Header_Straight_1x02 | IR_CUT1 |
| 1 | CONN_5 | Pin_Headers:Pin_Header_Straight_1x05 | LIGHT_SENS1 |
| 1 | CONN_8 | Pin_Headers:Pin_Header_Straight_1x08 | P1 |
More from nenadalm/diy
1- 2 layers54.6 × 47 mm

Similar boards
- 2 layers

- 2 layers160 × 74.9 mm

- 2 layers100.1 × 100.5 mm

SDR Reciever
greenjacketgirl/SDR_Receiver
This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…
176 parts8 - 2 layers50.8 × 74.9 mm

- 2 layers47 × 81.5 mm

- 2 layers70 × 30 mm

- 2 layers99.1 × 98.1 mm

Doorbot Panel
DoESLiverpool/doorbot-setup
Scripts to install the software required to deploy the Raspberry Pi DoorBots
26 parts2 - 2 layers58.4 × 84.8 mm

C64NIKI2
ibaldachini/C64NIKI2
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
27 parts2
Questions
How big is the Ir switcher PCB?
It measures 40.6 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ir switcher use?
11 parts, built around the BC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ir switcher KiCad files?
From the nenadalm/diy repository on GitHub, at the commit this page was made from: the board is raspicam/ir-switcher/ir-switcher.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ir switcher design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).