
MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.

Crazyflie charging deck is an open-source printed circuit board by nellbru, from the nellbru/crazyflie-charging-deck repository on GitHub. It is a 4-layer board of 38.9 × 29 mm with 46 parts on 43 nets, routed with 282 tracks and 68 vias.
It is built around the STBB1-APUR, DS28E05R+T and WS2812B, with the MB14F among its other parts. Its parts include 16 capacitors, 13 diodes, 6 resistors, 3 ICs and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | crazyflie_charging_deck:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 12 | WS2812B | crazyflie_charging_deck:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 2 | 100k | crazyflie_charging_deck:R_0603_1608Metric | R2, R5 |
| 2 | 10µF | crazyflie_charging_deck:C_1206_3216Metric | C13, C15 |
| 2 | 2.2µH | crazyflie_charging_deck:L_Sunlord_SWPA4020S | L1, L2 |
| 2 | 22µF | crazyflie_charging_deck:C_1206_3216Metric | C14, C16 |
| 2 | DO NOT MOUNT | crazyflie_charging_deck:R_0603_1608Metric | R1, R4 |
| 2 | HX PM2.0-1X10P TP-YQ | crazyflie_charging_deck:CONN-SMD_10P-P2.00_TPYE-1_SMD-10P | J1, J2 |
| 2 | STBB1-APUR | crazyflie_charging_deck:STBB1-APUR | U4, U5 |
| 2 | TestPoint | crazyflie_charging_deck:TestPoint_Pad_4.0x4.0mm | TP1, TP2 |
| 1 | 11k | crazyflie_charging_deck:R_0603_1608Metric | R6 |
| 1 | 15k | crazyflie_charging_deck:R_0603_1608Metric | R3 |
| 1 | DS28E05R+T | crazyflie_charging_deck:DS28E05R+T | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MB14F_C2943867 | crazyflie_charging_deck:MBF-SMD_L4.7-W3.8-P2.50-LS7.0-BL | D13 |
| 1 | VAL** | crazyflie_charging_deck:CF_orientation | EXP_ORIENTATION |

MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.

xinyew/Moamoa_caterpillar_hardware
KiCad project for the caterpillar board: a custom nRF54L15-based motor-control + IMU board (vibration robot). Firmware lives in a sibling repo: Moamoacaterpillarfirmware (Zephyr / nRF Connect SDK v3.3.0, board target…

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

It measures 38.9 × 29 mm and has 4 copper layers, 0.86 mm thick.
46 parts, built around the STBB1-APUR, DS28E05R+T, WS2812B and MB14F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nellbru/crazyflie-charging-deck repository on GitHub, at the commit this page was made from: the board is Crazyflie_charging_deck/Crazyflie_charging_deck.kicad_pcb and its schematic Crazyflie_charging_deck/Crazyflie_charging_deck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nellbru before reusing the design.