
Proton
ewyrick-mark-1/Chromatone
Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.

A PCB that integrates an RP2350 and various peripherals to play games.
Final Project PCB is an open-source printed circuit board by ndesserich, from the ndesserich/ECE-36200-Final-Project-PCB repository on GitHub. It is a 4-layer board of 81.7 × 100.6 mm with 80 parts on 95 nets, routed with 816 tracks and 152 vias.
It is built around the MCP73871EV, PAM8302AADCR and W25Q128JVSIQ, with the AP2112K-3.3, USBLC6-2P6 and ABM8-272-T3 among its other parts. Its parts include 25 capacitors, 21 resistors, 10 switches, 9 connectors and 6 ICs. It belongs with the RP2350 boards of this library.
This project was created using KiCAD V9. The schematic/design is heavily based on the Purdue Proton board, as well as the official Raspberry Pi Minimal Board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R19, R20, R21 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6 |
| 3 | 150 | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 3 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C4, C9, C23 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R9 |
| 3 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5, J8, J9 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 4.7u | Final_Project:C_0402_1005Metric_small_pads | C21, C22 |
| 2 | Conn_01x01_Socket | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10, J11 |
| 2 | GREEN | LED_SMD:LED_0805_2012Metric | D3, PD2 |
| 2 | RED | LED_SMD:LED_0805_2012Metric | D2, PD1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 3.3u | Final_Project:L_pol_2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | A | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW7 |
| 1 | ABM8-272-T3 | Final_Project:XTAL_ABM8-272-T3 | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | B | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW8 |
| 1 | BAT60JFILM | Final_Project:CR_60JFILM_STM | CR1 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | D | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW4 |
| 1 | L | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW5 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U5 |
| 1 | ORANGE | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | PAM8302AAD | Package_SO:SOIC-8_5.3x6.2mm_P1.27mm | U4 |
| 1 | R | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW6 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW2 |
| 1 | RP2350_80QFN | Final_Project:RP2350B_QFN-80_EP_10.573x10.573_Pitch0.4mm | U3 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | SD_Card_Receptacle | Final_Project:10067847-001RLF_AMP | J4 |
| 1 | SEL | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW10 |
| 1 | START | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW9 |
| 1 | U | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U9 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |

ewyrick-mark-1/Chromatone
Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.

MAGG4444/BT_Audio_Player_PCB
Bluetooth-enabled audio player PCB for wireless audio playback and easy device integration.

PurdueECE-362-SSTV-Project/SSTV-Hardware
This repo contains the SCHEM and PCB files for the SSTV Receiver.

rober708/BIRD-E
The Bounded Infrared Recording Drone Ecosystem (BIRD-E) is a tethered quadcopter with an attached infrared camera, with livestream functionality and XBOX ground control. Senior design capstone at Purdue ECE.


PythonAtSea/spark-2350
The spark!2350 is a RP2350 based microcontroller that has a RM2 chip for BLE and WiFi. It also has a LiPo battery charger, as it is designed for use in mireless keyboards.

gianluca-rainis/UHBadge
Universal Hacker Badge - The ultimate badge for hackers.

It measures 81.7 × 100.6 mm and has 4 copper layers, 1.6 mm thick.
80 parts, built around the MCP73871EV, PAM8302AADCR, W25Q128JVSIQ and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ndesserich/ECE-36200-Final-Project-PCB repository on GitHub, at the commit this page was made from: the board is Final-Project-PCB.kicad_pcb and its schematic Final-Project-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ndesserich before reusing the design.