MAGG4444/BT_Audio_Player_PCBBluetooth-enabled audio player PCB for wireless audio playback and easy device integration.
BT Audio Player PCB is an open-source printed circuit board by MAGG4444, from the MAGG4444/BT_Audio_Player_PCB repository on GitHub. It is a 2-layer board of 77.5 × 85.5 mm with 69 parts on 129 nets, routed with 567 tracks and 37 vias.
It is built around the W25Q128JVSIQ, USBLC6-2P6 and ABM8-272-T3, with the BAT60JFILM among its other parts. Its parts include 26 capacitors, 15 resistors, 6 ICs, 6 connectors and 3 diodes. It belongs with the audio and music boards and the RP2350 boards of this library.
Bluetooth-enabled audio player PCB for wireless audio playback and easy device integration.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C8, C11, C13, C14, C15, C16, C17, C18, C19, C20, C21 |
| 4 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C5, C6, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP4, TP6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R8 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R13, R15 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R7 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C23, C27 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_01x28_Pin | Connector_PinHeader_2.54mm:PinHeader_1x28_P2.54mm_Vertical | J2, J3 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 12dB | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U5 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 3.3u | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | BAT60JFILM | BAT60JFILM:CR_60JFILM_STM | CR1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Microchip_BM83 | RF_Module:Microchip_BM83 | U4 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW2 |
| 1 | RP2350_80QFN | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U3 |
| 1 | SWD_DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U9 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D3 |
ewyrick-mark-1/Chromatone
Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.
ndesserich/ECE-36200-Final-Project-PCB
A PCB that integrates an RP2350 and various peripherals to play games.
PurdueECE-362-SSTV-Project/SSTV-Hardware
This repo contains the SCHEM and PCB files for the SSTV Receiver.
rober708/BIRD-E
The Bounded Infrared Recording Drone Ecosystem (BIRD-E) is a tethered quadcopter with an attached infrared camera, with livestream functionality and XBOX ground control. Senior design capstone at Purdue ECE.
GilDev/GDEK
Low-profile, compact, beginner-friendly, assembly-friendly 4×6 with 5-keys thumb cluster ergonomic keyboard with universal keyswitch support, per-key RGB LED, encoder and RP2040 controller. Phew, that’s a lot!
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
It measures 77.5 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the W25Q128JVSIQ, USBLC6-2P6, ABM8-272-T3 and BAT60JFILM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MAGG4444/BT_Audio_Player_PCB repository on GitHub, at the commit this page was made from: the board is PCB.kicad_pcb and its schematic PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MAGG4444 before reusing the design.