
PCBHyperloop
ncwarren/canada-ece-recruits
Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions

Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions
Hyperloop senior design is an open-source printed circuit board by ncwarren, from the ncwarren/canada-ece-recruits repository on GitHub. It is a 2-layer board of 138.7 × 48.8 mm with 34 parts on 46 nets, routed with 264 tracks and 33 vias.
It is built around the RN-2407S and L298N. Its parts include 11 diodes, 6 capacitors, 5 resistors, 3 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions
Please email n.warren@mun.ca to be added as a collaborator to the repo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diodes_SMD:D_0805 | D1, D2, D3, D4, D9, D10, D11, D12 |
| 5 | R | Resistors_SMD:R_0805 | R1, R2, R3, R5, R6 |
| 3 | 0.1uF | Capacitors_SMD:C_0805 | C2, C3, C5 |
| 3 | LED | LEDs:LED_0805 | D5, D6, D7 |
| 2 | Buttons_Switches_THT:SW_PUSH-12mm | SW1, SW2 | |
| 2 | POT | Potentiometers:Potentiometer_Alps_RK09K_Vertical | RV1, RV2 |
| 2 | Screw_Terminal_01x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J1, J2 |
| 1 | 10uF | Capacitors_SMD:C_0805 | C6 |
| 1 | 47uF | Capacitors_THT:CP_Radial_D16.0mm_P7.50mm | C4 |
| 1 | ARDUINO_NANO | arduino:arduino_nano | ARDUINO1 |
| 1 | CP | Capacitors_THT:CP_Radial_D16.0mm_P7.50mm | C1 |
| 1 | L298N | TO_SOT_Packages_THT:Multiwatt-15_Vertical_StaggeredType1 | U3 |
| 1 | LM2937IMPX-15/NOPB | TO_SOT_Packages_SMD:TO-263-3_TabPin4 | U2 |
| 1 | RN-2407S | Power_Integrations:PDIP-8 | U1 |
| 1 | S1 | Wire_Pads:SolderWirePad_single_1-2mmDrill | TP1 |
| 1 | S2 | Wire_Pads:SolderWirePad_single_1-2mmDrill | TP2 |

ncwarren/canada-ece-recruits
Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions

ncwarren/canada-ece-recruits
Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions

ncwarren/canada-ece-recruits
Repository for the 2017 Paradigm recruitment drive in Canada for PCB submissions


pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64

Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.


CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

It measures 138.7 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the RN-2407S and L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ncwarren/canada-ece-recruits repository on GitHub, at the commit this page was made from: the board is Moh_Liam/hyperloop/hyperloop_senior-design.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ncwarren before reusing the design.