NBER08/SX1262-DevboardA development board for the Semtech sx1262 LoRa chip.
Devboard is an open-source printed circuit board by NBER08, from the NBER08/SX1262-Devboard repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 64.4 × 38.1 mm with 49 parts on 79 nets, routed with 507 tracks and 147 vias.
It is built around the E73-2G4M08S1C, NPM1304-QEAA-R and SRV05-4, with the LI0603G121R-10 among its other parts. Its parts include 13 capacitors, 10 resistors, 5 connectors, 4 ICs and 3 diodes. It belongs with the microcontroller boards boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C6, C7, C10, C11 |
| 4 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6, R7 |
| 3 | 300 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R10 |
| 3 | Amber | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3 |
| 2 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C8 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12, C13 |
| 2 | 2u2 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1, L2 |
| 2 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 1 | 10u(DNP) | Inductor_SMD:L_Changjiang_FTC201610D | L3 |
| 1 | 114993390 | Project_Components:114993390 | IC1 |
| 1 | 150k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 1S Lipo | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | 2u2 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 32.768 | Project_Components:WE-XTAL_CFPX-217 | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 693071010811 | 693071010811:693071010811 | J1 |
| 1 | E73-2G4M08S1C | Project_Components:E73-2G4M08S1C | U2 |
| 1 | EXT_PIN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LI0603G121R-10 | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | FB1 |
| 1 | NPM1304-QEAA-R | Project_Components:QFN32_5X5_NOR | U1 |
| 1 | RMF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3 |
| 1 | SHPHLD | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | VMCU | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | VSYS | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
It measures 64.4 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the E73-2G4M08S1C, NPM1304-QEAA-R, SRV05-4 and LI0603G121R-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NBER08/SX1262-Devboard repository on GitHub, at the commit this page was made from: the board is Devboard/Devboard.kicad_pcb and its schematic Devboard/Devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
NBER08/CanSat_Devboard
. ├─ Computations # Misc calculations ├─ HTML # HTML files for generated webpage ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts…
danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…
NBER08/StartrackerOrion-Hardware
A repo on my project of making a DIY startracker for my astrophotography desires.
siderakb/calcite
60/52 keys Kailh Choc V1 low profile switches ortho keyboard