2 layers30.1 × 37.3 mm
STM32 AS5600 CHIPS
Sutej2907/PCB_DESIGN_STM_AS5600
STM32 BLUE PILL F103C8 AND MAGNETIC ENCODER AS5600 CHIPS INTEGRATED PCB
40 parts
2 layers29.4 × 27 mm
Stm32proj
jaishnu-git/pcb-stm32- Size
- 29.4 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 46
- Pads
- 144
- Tracks, vias
- 330, 43
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Feb 2026
- Updated
- 19 Feb 2026
Overview
Stm32proj is an open-source printed circuit board by jaishnu-git, from the jaishnu-git/pcb-stm32 repository on GitHub. It is a 2-layer board of 29.4 × 27 mm with 33 parts on 46 nets, routed with 330 tracks and 43 vias.
It is built around the AMS1117-3.3, LI0603G121R-10 and TS09-63-25-R-260-SMT-TR. Its parts include 14 capacitors, 5 resistors, 3 ICs, 3 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
3
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LI0603G121R-10
0603-40℃~+125℃ 1 120Ω@100MHz 200mΩ 700mA 0603 Ferrite Beads ROHSLairdFerrite Beads
TS09-63-25-R-260-SMT-TR
--30℃~+80℃ 12V 2.6N 40,000 Cycles 50mA Gull Wing Rectangular Button SPST Surface Mount,Vertical - Tactile Switches ROHSCUITactile Switches
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C9, C14 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H2, H2, H2, H2 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 1k5 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J1, J2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 5k1 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AS5600 | AS5600:SOIC8 | U3 |
| 1 | LED | LED_SMD:LED_01005_0402Metric | D1 |
| 1 | LI0603G121R-10 | LI0603G121R-10:FB_LI0603G121R-10 | E1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TS09-63-25-R-260-SMT-TR | TS09-63-25-R-260-SMT-TR:SW_TS09-63-25-R-260-SMT-TR | S1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Questions
How big is the Stm32proj PCB?
It measures 29.4 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32proj use?
33 parts, built around the AMS1117-3.3, LI0603G121R-10 and TS09-63-25-R-260-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32proj KiCad files?
From the jaishnu-git/pcb-stm32 repository on GitHub, at the commit this page was made from: the board is stm32proj/stm32proj.kicad_pcb and its schematic stm32proj/stm32proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32proj design in my own project?
Its repository states no licence, so its author keeps all rights: ask jaishnu-git before reusing the design.
Similar boards
- 2 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/HHL-GameCube-Parts
Open repo with 3d GameCube models. STEP files!
28 parts38GPL-3.0 - 4 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62 - 4 layers64.1 × 43.6 mm
CanSat Devboard
NBER08/CanSat_Devboard
. ├─ Computations # Misc calculations ├─ HTML # HTML files for generated webpage ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts…
49 partsMIT - 4 layers55.6 × 104.6 mm
- 2 layers86.1 × 71.9 mm
Orion
NBER08/StartrackerOrion-Hardware
A repo on my project of making a DIY startracker for my astrophotography desires.
105 partsMIT - 2 layers64.4 × 38.1 mm
Devboard
NBER08/SX1262-Devboard
A development board for the Semtech sx1262 LoRa chip.
49 partsCERN-OHL-S-2.0 - 4 layers67.7 × 97.2 mm
