2 layers
2 layers31.2 × 10.2 mm
ULightHouse v1.1
navan93/uLightHouseA tiny LED circuit which lights up in the dark.
- Size
- 31.2 × 10.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 15
- Pads
- 33
- Tracks, vias
- 38, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Jun 2023
- Updated
- 21 Oct 2023
Overview
ULightHouse v1.1 is an open-source printed circuit board by navan93, from the navan93/uLightHouse repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.2 × 10.2 mm with 10 parts on 15 nets, routed with 38 tracks and 5 vias.
It is built around the MSP430G2231IN14 and IRLML6344. Its parts include 3 connectors, 2 diodes, 1 capacitor, 1 resistor and 1 IC. It belongs with the MSP430 boards of this library.
Main components
2
MSP430G2231IN14
PDIP-14-40℃~+85℃ 1.8V~3.6V 10 10bit 128Byte 16 Bit 16MHz 2KB Built-in FLASH MSP430 CPU16 PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
IRLML6344
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC@4.5V 650pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdfirefly
A tiny LED circuit which lights up in the dark.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1mH | Inductor_SMD:L_HM79M20102LFTR | L1 |
| 1 | 47uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | J3 |
| 1 | IRLML6344 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MSP430G2231IN14 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | Orange LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | VCC | TestPoint:TestPoint_Pad_D1.5mm | J1 |
| 1 | Warm white LED | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | D2 |
Questions
How big is the ULightHouse v1.1 PCB?
It measures 31.2 × 10.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ULightHouse v1.1 use?
10 parts, built around the MSP430G2231IN14 and IRLML6344. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ULightHouse v1.1 KiCad files?
From the navan93/uLightHouse repository on GitHub, at the commit this page was made from: the board is hardware/uLightHouse_v1.1/uLightHouse_v1.1.kicad_pcb and its schematic hardware/uLightHouse_v1.1/uLightHouse_v1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ULightHouse v1.1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers34.5 × 25 mm
CameraController
UCLA-CUB/CameraControllerBoard
Schematic and PCB for the camera gimbal controller.
25 parts - 4 layers70 × 70 mm
1.Electronics
I-M-Robotics-Lab/STM32-Quadcopter
Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.
57 parts80GPL-3.0 - 2 layers86 × 86 mm
Production
kerikun11/IR-Station
Infrared Remote Controller with ESP8266 WiFi-module. You can control your home appliances with your smartphone or laptop.
128 parts54MIT - 2 layers99.8 × 99.8 mm
Stmbl 5.0
freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
432 parts53GPL-3.0 - 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers61.4 × 103.3 mm
HB Dis EP-42BW
jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
45 parts18 - 2 layers45.8 × 40.2 mm
GoProControl
synfinatic/GoProControl
GoPro WiFi controller board using an ESP8266 allowing easy integration with other circuits
27 parts13GPL-3.0