2 layers31.2 × 10.2 mm
2 layers
Peltier Boost + MSP430
mjbella/TeaTimerPCB- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 26
- Pads
- 82
- Tracks, vias
- 113, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Apr 2016
- Updated
- 25 Apr 2016
Overview
Peltier Boost + MSP430 is an open-source printed circuit board by mjbella, from the mjbella/TeaTimerPCB repository on GitHub. It is a 2-layer board with 22 parts on 26 nets, routed with 113 tracks and 2 vias.
It is built around the MSP430G2231IN14 and JUMPER3. Its parts include 9 capacitors, 4 connectors, 2 resistors, 2 ICs and 1 crystal. It belongs with the MSP430 boards of this library.
Main components
2Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | C | Capacitors_SMD:C_0805 | C2, C3, C4, C5, C9 |
| 2 | JUMPER3 | Connect:PINHEAD1-3 | JP1, JP2 |
| 2 | R | Resistors_SMD:R_0805 | R1, R2 |
| 1 | C | Capacitors_Tantalum_SMD:TantalC_SizeC_EIA-6032_Reflow | C1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | CP | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_Reflow | C7 |
| 1 | CP | Capacitors_SMD:C_0805 | C6 |
| 1 | CP | Capacitors_ThroughHole:C_Radial_D18_L36_P7.5 | C8 |
| 1 | Crystal | Pin_Headers:Pin_Header_Straight_1x02 | Y1 |
| 1 | DEBUGME | Pin_Headers:Pin_Header_Straight_1x08 | P3 |
| 1 | LTC3108 | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | U2 |
| 1 | MSP430G2231IN14 | Housings_DIP:DIP-14_W7.62mm | U1 |
| 1 | Programmer | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | SPEAKER | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | SP1 |
| 1 | TMP_SENSOR | Pin_Headers:Pin_Header_Straight_1x03 | P4 |
| 1 | TRANSFO | partlib:WE_EHPI | T1 |
Questions
What parts does the Peltier Boost + MSP430 use?
22 parts, built around the MSP430G2231IN14 and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Peltier Boost + MSP430 KiCad files?
From the mjbella/TeaTimerPCB repository on GitHub, at the commit this page was made from: the board is Peltier Boost + MSP430.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Peltier Boost + MSP430 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mjbella before reusing the design.
Similar boards
- 2 layers34.5 × 25 mm
CameraController
UCLA-CUB/CameraControllerBoard
Schematic and PCB for the camera gimbal controller.
25 parts - 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers49 × 49 mm
OSBMS Balancer Rev 0.9
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
76 parts248 - 4 layers137 × 86 mm
- 2 layers100 × 90 mm
- 2 layers59.2 × 41 mm
- 2 layers86 × 54 mm
