2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT
2 layers225.7 × 100.8 mm
Drv8300
napowderly/drv8300The DRV8300 is a three-phase BLDC Gate Driver used to drive N-Channel MOSFET Half-Bridges using integrated bootstrap diodes.
- Size
- 225.7 × 100.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 21
- Pads
- 35
- Tracks, vias
- 64, 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Feb 2024
- Updated
- 1 Apr 2024
Overview
Drv8300 is an open-source printed circuit board by napowderly, from the napowderly/drv8300 repository on GitHub, published under the MIT licence. It is a 2-layer board of 225.7 × 100.8 mm with 6 parts on 21 nets, routed with 64 tracks and 12 vias.
Its parts include 4 capacitors, 1 resistor and 1 IC.
README
README.mdDRV8300 | 100-V Three-Phase BLDC Gate Driver
The DRV8300 is a three-phase BLDC Gate Driver used to drive N-Channel MOSFET Half-Bridges using integrated bootstrap diodes.
Package: VQFN (24)
Key Specs:
- Integrated bootstrap diodes
- Cross conduction prevention
- 3V3 to 5V logic supported
- Supports independent high and low gate control.
Datasheet: https://www.ti.com/lit/ds/symlink/drv8300.pdf?ts=1711538531384
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 50V 1uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | lib:C0603 | C1, C2, C3, C4 |
| 1 | lib:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5 | U1 | |
| 1 | 62.5mW Thick Film Resistors ±100ppm/℃ ±1% 40.2kΩ 0402 Chip Resistor - Surface Mount ROHS | lib:R0402 | R1 |
Questions
How big is the Drv8300 PCB?
It measures 225.7 × 100.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Drv8300 use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drv8300 KiCad files?
From the napowderly/drv8300 repository on GitHub, at the commit this page was made from: the board is elec/layout/default/drv8300.kicad_pcb and its schematic elec/layout/default/drv8300.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drv8300 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
