

Envelope generator
Analog3 envelope generator
- Size
- 151.4 × 128.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 95
- Pads
- 374
- Tracks, vias
- 1,250, 194
- Pours
- 269
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Nov 2025
- Updated
- 2 May 2026
Overview
Envelope generator is an open-source printed circuit board by naokiiwakami, from the naokiiwakami/envelope-generator repository on GitHub, published under the MIT licence. It is a 2-layer board of 151.4 × 128.5 mm with 128 parts on 95 nets, routed with 1,250 tracks and 194 vias.
It is built around the STM32G0B1CET6, TCAN3413D and MC34063AD, with the MCP6004-E/P, TL072 and CD4051BE among its other parts. Its parts include 41 resistors, 22 capacitors, 10 ICs, 10 connectors and 8 diodes. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
12STM32G0B1CET6
LQFP-48(7x7)1.7V~3.6V 12bit 12bit 44 64MHz ARM Cortex-M0+ LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN3413D
SOIC-8CAN TransceiversTexas InstrumentsMC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC ConvertersMCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierTL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierCD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersLM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparatorsPEL12D-4225S-S2024
插件插件 Rotary Encoders ROHSBournsRotary Encoders1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesRB521S30T1G-DW
SOD-5231 Independent 1A 200mA 30V 30uA@10V 500mV@200mA SOD-523 Schottky Diodes ROHSDOWOSchottky DiodesWP115VEGW
插件,D=3mm-40℃~+85℃ 20mA 2V、2.2V 30mcd、30mcd 3mm Round Lens 565nm、627nm 568nm、617nm 60° 62.5mW、75mW Frosted White Lens Red, Yellow Green 插件,D=3mm LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteXLMDKCBD34M
插件-40℃~+85℃ 1.95V、3.3V 158mcd、198mcd 20mA 460nm、645nm 465nm、630nm 60° 75mW、120mW Common Cathode Red, Blue White Lens 插件 LED Indication - Discrete ROHSSunLEDLED Indication - Discrete
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Synth:ALPHA_9MM | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 6 | 36k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8, R25, R26, R34, R36 |
| 5 | 180 | Resistor_SMD:R_0603_1608Metric | R14, R15, R18, R27, R30 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R24, R28, R33 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C7, C16 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C14, C20 |
| 3 | 100u | Capacitor_SMD:CP_Elec_6.3x5.4_Nichicon | C1, C2, C6 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20, R21 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric | R16, R17, R29 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R40, R41 |
| 2 | 16k | Resistor_SMD:R_0603_1608Metric | R6, R10 |
| 2 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38, R39 |
| 2 | 18k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35, R37 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R13 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19 |
| 2 | 27k | Resistor_SMD:R_0603_1608Metric | R7, R11 |
| 2 | 330p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C22 |
| 2 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C15 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23 |
| 2 | 9p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | LM4040DBZ-3.0 | Package_TO_SOT_SMD:SOT-23 | U4, U7 |
| 1 | 1.5 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 128x64OLED | Panel_Utilities:128x64 OLED Window | SSD1306 |
| 1 | 150p | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 16MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 2.0k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 220u | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | Analog SRC 2 | Synth:LED_D3.0mm | D10 |
| 1 | Analog SRC 1 | Synth:LED_D3.0mm | D7 |
| 1 | CAN | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J6 |
| 1 | CD4051B | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U10 |
| 1 | CV 1 In | Synth:Thonkiconn | J9 |
| 1 | CV 2 In | Synth:Thonkiconn | J10 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | J3 |
| 1 | Dual or Voice 1 Out | Synth:Thonkiconn_Stereo | J2 |
| 1 | EG 2 Out | Synth:Thonkiconn | J4 |
| 1 | Gate 1 | Synth:LED_D3.0mm | D2 |
| 1 | Gate 1 In | Synth:Thonkiconn | J5 |
| 1 | Gate 2 | Synth:LED_D3.0mm | D3 |
| 1 | Gate 2 In | Synth:Thonkiconn | J7 |
| 1 | LM393 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | PEL12D-4225S-S2024 | PEL12D:TO_4225S-S2024 | U6 |
| 1 | Power bus | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | RB521S30T1G | Diode_SMD:D_SOD-523 | D1 |
| 1 | RESET_SW | Tactile_Switches:Panasonic_EVQ_Q2 | SW1 |
| 1 | SSD1306 | SSD1306:128x64OLED_aki | Brd1 |
| 1 | STM32G0B1CET6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | SWD | Connector_Synth:CONN_2x10_3220-10-0100-00_CNC | J8 |
| 1 | TCAN3413 | Package_TO_SOT_SMD:TSOT-23-8 | U9 |
| 1 | TL072 | Package_TO_SOT_SMD:SOT-23-8 | U1 |
| 1 | USER_SW | Tactile_Switches:SW4_1825910-B_TEC | SW3 |
| 1 | WP115VEGW | Synth:LED-3.0mm-3 | D6 |
| 1 | XLMDKCBD34M | Synth:LED-3.0mm-3 | D4 |
The 105 most common of 128 parts.
Similar boards
- 2 layers69.2 × 106.7 mm

- 2 layers69.2 × 106.7 mm

- 2 layers152.3 × 128.5 mm

- 4 layers100 × 60 mm

T1conv
ajefferies2/t1conv
100BASE-T1 ↔ 100BASE-TX media converter + dual CAN FD/USB adapter on one board.
125 parts - 2 layers50 × 50 mm

- 4 layers65 × 55 mm

Gateway
opensimgear/device-gateway
Work-in-progress STM32 Cyphal/CAN-to-USB gateway with automatic input/output enrollment, ordered HID controllers, guarded configuration/leased action/event routing and native/Pico debug simulation.
45 parts - 2 layers65 × 56 mm

Industrial hat rpi4
V2gkr/industrial_hat_rpi4
hat to communicate via rs232, rs485, can fd with galvanic isolation
52 parts - 4 layers85 × 75 mm

Starter
opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
111 parts
Questions
How big is the Envelope generator PCB?
It measures 151.4 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Envelope generator use?
128 parts, built around the STM32G0B1CET6, TCAN3413D, MC34063AD and MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Envelope generator KiCad files?
From the naokiiwakami/envelope-generator repository on GitHub, at the commit this page was made from: the board is hardware/envelope-generator.kicad_pcb and its schematic hardware/envelope-generator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Envelope generator design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).